Free shipping on orders $149 up. exclusions apply

100', 1/2” Porous Soaker Hose, color black, for use with 1/2" .700 compression fittings only

100 ft. , 1/2” Porous Soaker Hose, color black, for use with 1/2 in.  .700 compression fittings only
In Stock

The Drip Store’s model T038 1/2" porous soaker hose is available in 100’ and a flow rate of 100 GPH per 100’ at 15 PSI. Use the porous soaker hose with .700 OD compression fittings for loops around trees, vegetable gardens, flowerbeds, narrow plantings, large pots and containers

Part #: T038
$19.89 ea.
  ( 2 ratings/reviews )

The Drip Store’s porous soaker tubing is extruded pipe made of recycled rubber material. When looked at under a magnified glass, the extruded porous soaker tubing is peppered with many tiny holes, and when under pressure, sweats along the full length of the tubing. The Drip Store’s 1/4", 1/2" and 5/8” laser porous soaker tubing are available only in black color and in 50’ and 100’ lengths. If you install the 1/4", 1/2" or 5/8” porous soaker tubing in your vegetable gardens, flowerbeds, patios, containers, narrow plantings or boxes, you can install up to 12 lines, each with 30‘ long using the 1/4" porous soaker tubing, using the 1/2" drip tubing as the main line.

For residential applications use the 1/4" porous soaker tubing with our 1/4" barbed fittings and the 1/2" porous soaker tubing our compression fittings with .700 OD. The porous soaker tubing can be installed above the ground only and if used above the ground can be covered with mulch to blend it with the landscape.

Flow versus length:
Size: Flow rate Pressure Maximum recommended length
1/4" 18 gallon per hour per 50 feet 15 PSI 30’ per line
1/2" 50 gallon per hour per 50 feet 15 PSI 70’ per line
5/8” 60 gallon per hour per 50 feet 15 PSI 90’ per line

By: sue930032, 05/08/13

We wanted to water raised boxes in our garden with soaker hose. Spent a day re-plumbing to accept soaker hose with two trips to the hardware store for correct fittings (this hose is actually 5/8", not 1/2"). Turned on the water and virtually nothing happened. If we had left the water on all day, the ground around the hose might have got damp. Tried doing just 50' at a time and results were exactly the same.

Would not recommend.

By: susan hodge, 08/26/07

I was very disappointed in this product. Within 3 weeks of installing it, holes or splits would appear with the water spraying out, not weeping. I followed all the instructions, using a 25psi pressure regulator at the beginning of the line and using .700 fittings. Would not recommend.

  • Color: Black
  • Filter requirement: 155 Mesh
  • Flow rate: 100 GPH per 100’ @ 15 PSI
  • Materials: Recycled rubber
  • Maximum lateral length: 30’
  • Operating pressure: 10 to 25 PSI
  • Porous soaker tubing size: 1/2"
  • Available with 100 GPH per 100’ at 15 PSI
  • Flexible tubing for easy installation
  • The porous soaker tubing is made of recycled rubber material with UV resistance.
  • Used for above grade installation

Installation for Porous Soaker Tubing

The recycled rubber porous soaker tubing can be installed above the ground and covered with mulch to blend it with the landscape.  To connect the 1/4" porous soaker tubing to drip tubing, use our 1/4" barbed fittings, and to connect the 1/2" use the .700 OD compression fittings.

  1. If automation is used and you will be running porous soaker tubing, drip and sprinkler zones, the controller should be selected with care. The ideal controller should have an independent program for each valve, or two to four programs for flexibility to use with each zone. Standard electric remote control valves (model C023), or 3/4" (model C041) to 2” (model C044) battery operated controllers can be used in the installation, however, care should be taken to review the flow characteristics of the zone that the valve or controller will be accommodating.
  2. The porous soaker tubing should be first laid out and secured into the ground using plastic stakes before connecting the porous soaker tubing to the main lateral.
  3. Flushing: Prior to testing leave the end of the main line and the porous soaker tubing laterals open and then flush the system of all debris. Close the end line and all laterals.
  4. Pressure tests the system with a minimum of 25 PSI to identify leaks in the lateral, fittings and the drip zone.