Free shipping on orders $149 $99 & up. exclusions apply

Woodpecker Junior Pressure Compensating Drip Emitters


Woodpecker Junior Pressure Compensating Drip Emitters

Category: PC Drip Emitters

Available ModelsPartPrice
D081 : .5 GPH Woodpecker Junior PC Drip Emitter, Color Red .5 GPH Woodpecker Junior PC Drip Emitter, Color RedD081
$0.29 - $0.34 ea.
D082 : 1 GPH Woodpecker Junior PC Drip Emitter, Color Gray 1 GPH Woodpecker Junior PC Drip Emitter, Color GrayD082
$0.29 - $0.34 ea.
D083 : 2 GPH Woodpecker Junior PC Drip Emitter, Color Green 2 GPH Woodpecker Junior PC Drip Emitter, Color GreenD083
$0.29 - $0.34 ea.

The D081, D082 and D083 from NETAFIM irrigation are color-coded, small sized pressure compensating drip emitters with a unique design that regulates flow rate and provides continuous self-cleaning action during operation.

The drippers have outstanding resistance to clogging and are very easy to install. The drip emitters are available in .5, 1 and 2 GPH. Use this agricultural grade dripper to ensure even, consistent water flow from each drip emitter along the line, regardless of water pressure fluctuations in the system.

Drip irrigation is the slow application of water directly to the plants' root zone in a predetermined pattern. By preserving an optimum moisture level in the soil at all times, drip irrigation results in less water lost to the sun and the wind and less water wasted on non-growth areas. The resulting proper balance of water and air leads to very efficient irrigation.
One of the most important features of a drip irrigation system is the creation of a totally new and more favorable root zone environment within the planting. Drip irrigation sustains this environment by using low flow rates to maintain constant soil moisture levels. This encourages better growth and disease resistance by reducing plant stress.

  • Dripper flow rate
    • D081 : .5 GPH Red
    • D082 : 1 GPH Gray
    • D083 : 2 GPH Green
  • Materials
    • D081, D082, D083 : Body: Plastic
    • D081, D082, D083 : Diaphragm : Silicon
  • Operating pressure
    • D081, D082, D083 : 7 to 50 PSI
  • Recommended filtration
    • D081, D082, D083 : 150 to155 mesh
  • Recommended pressure
    • D081, D082, D083 : 25 to 30 PSI
  • Barb inlet.160" X barb outlet .118
  • Can be used with .118" ID micro-tubing outlet for hanging baskets
  • Dripper body is color-coded denoting flow rate
  • Small profile is easy to position and hide
    • Flowerbeds
    • For long drip line lateral in orchards or on undulating terrain
    • Shrubs
    • Trees
    • Vines
    • Installation for Drip Emitters

      To water a diverse selection of plant sizes such as trees, shrubs, bulbs and perennials, the option below can be utilized:

      For maximum system expansion using a single water source, and to better control the system’s total flow rate, use .5 or I GPH (gallons per hour) drip emitters.  We recommend using drip emitters with the same flow rate to resolve the difficulty of irrigating a garden planted with a diversity of plant types and sizes, for example a garden with trees, shrubs, groundcovers, bulbs and perennials installed on the same system. To increase the amount of water applied to larger or thirstier plants, simply add more drippers, at intervals of 12” around the plant. This drip irrigation method provides the plant with a larger soaked area to cover a larger section of the plant root zone. By adjusting irrigation time, the right amount of water can then be applied evenly to all the plants.

      When using drip irrigation it is important to select the correct application rate and spacing in order to achieve the optimum soaked pattern shape. In sandy soil, water tends to drain quickly (gravitational force) with little lateral movement, so applying a higher flow rate over a given time period will produce a wider pattern. (Using point source irrigation with .5 GPH drip emitters for one hour will provide a smaller soaked area then using 1 GPH for the same amount of time due to the soil characteristics.)

       

      ·         Suggested number of drippers per plant:

      o        Vines with spacing of 6’- 8’ use 1 GPH per vine or 2, .5 GPH drip emitters spaced on each side of the vine with 8” to 12” between the drip emitters.

      o        Plants in close spacing: use a 1-GPH dripper every 10" to 12".

      o        Small plants up to 2 feet high spaced a few feet apart: use one 1-GPH dripper per plant.

      o        Plants 2' to 3' high: use 2 1-GPH drippers per plant spaced 12" apart.

      o        Plants 3' to 5' high: use 3 to 4 1-GPH drippers per plant, spaced 12" apart or loop the drip hose around the plant and insert the drippers every 12".

      o        Plant 5' to 7' high: use 4 to 6 1-GPH drippers per plant, spaced 12" apart or loop the drip hose around the plant with the drippers spaced 12” apart.

      How much time to water:  Turn the water on for 45 minutes to 1 hour every two to three days, depending on the drip emitter flow rate, your location and the soil type.  After a week or two check the soil and the health of the plants, and adjust the irrigation time as needed.  If you have an irrigation controller and you need to add more time, adjust the time on the controller or program the controller with additional start-times.

      Note: Katif dripper models D043, D044 and D045 require the use of a punch with a 4mm tip.