For use near groups of plants or under a large plant, the adjustable bubbler on barb model MS025 and model MS026 on stake have a gentle stream umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.
|360-Degree Adjustable Umbrella Pattern Bubbler on Barb||MS025|
$0.59 - $0.65 ea.
|360-Degree Adjustable Umbrella Pattern Bubbler on a Stake||MS026|
$0.80 - $0.89 ea.
The umbrella bubbler is an adjustable high flow emission device available on a barb or barb with a stake. The adjustable bubblers can be used with 1/4” micro tubing, inserted directly into the 1/2” drip tubing or connected to with a semi rigid poly riser to raise the bubbler above ground, this part can be found under the drip accessories. The adjustable bubbler discharges the suggested flow at a pressure of 20, 30 and 40 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.