Free shipping on orders $149 & up. exclusions apply

Adjustable Mini Bubbler Pattern on Barb or Stake


Adjustable Mini Bubbler Pattern on Barb or Stake

For use near groups of plants or under a large plant, the adjustable mini bubbler on barb model MS050 and model MS055 on stake have a gentle stream 360-degree umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.

Category: Bubblers

Available ModelsPartPrice
MS050 : 360- Degree Adjustable Mini Bubbler Pattern on Barb 360- Degree Adjustable Mini Bubbler Pattern on BarbMS050
$0.30 - $0.34 ea.
MS055 : 360- Degree Adjustable  Mini Bubbler on Stake 360- Degree Adjustable Mini Bubbler on StakeMS055
$0.51 - $0.56 ea.

The umbrella mini bubbler is an adjustable high flow emission device available on a barb or barb with a stake. The adjustable bubblers on barb can be used with 1/4” micro tubing, inserted directly into the 1/2” drip tubing or connected to with a semi rigid poly riser to elevate the bubbler above ground, these parts can be found under the drip accessories section. The bubbler with the stake can be used with 1/4" micro tubing extended from the 1/2" drip tubing.

The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.

  • Bubbler pattern
    • MS050, MS055 : 360° coverage
  • Diameter of Coverage
    • MS050, MS055 : .7 to 1.9' full circle
  • Flow rates at preset pressure of
    • MS050, MS055 : 15 PSI is 27 GPH
    • MS055 : 20 PSI is 14.3 GPH
    • MS050 : 20 PSI is 30 GPH
    • MS050 : 25 PSI is 33 GPH
    • MS055 : 30 PSI is 18.7 GPH
    • MS050 : 30 PSI is 35 GPH
    • MS055 : 40 PSI is 21.6 GPH
  • Materials
    • MS050, MS055 : Polyethylene
  • Operating pressure
    • MS050, MS055 : 15 to 30 PSI
  • Recommended filtration
    • MS050, MS055 : 120 mesh
  • Recommended pressure
    • MS050, MS055 : 25 PSI
  • 360-degree adjustable pattern
  • Can be taken apart for easy cleaning
  • Fingertip low control can be adjusted from 0 to 35 GPH with a shut off option
  • The barbed bubbler Install into a 1/4" micro tubing or on to a 1/2" drip tubing
  • The stake bubbler Install into a 1/4" micro tubing or only
  • UV protected; manufactured from superior durable plastics for long life against degradation