For use near groups of plants or under a large plant, the adjustable mini bubbler on barb model MS050 has a gentle stream 360-degree umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.
|+ 1||$0.33 ea.|
|+ 101||$0.31 ea.|
|+ 501||$0.29 ea.|
The umbrella mini bubbler is an adjustable high flow emission device available on a barb. The adjustable bubblers can be used with 1/4" micro tubing, inserted directly into the 1/2" drip tubing or connected to with a semi rigid poly riser to elevate the bubbler above ground, this part can be found under the drip accessories. The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.