Free shipping on orders $149 & up. exclusions apply

360- Degree Adjustable Mini Bubbler on Stake


360- Degree Adjustable  Mini Bubbler on Stake
In Stock

For use near groups of plants or under a large plant, the adjustable mini bubbler on stake model MS055 has a gentle stream 360-degree umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.

Part #: MS055
$0.51 - $0.56 ea.
+ 1$0.56 ea.
+ 101$0.54 ea.
+ 501$0.51 ea.
  ( 2 ratings/reviews )

The umbrella mini bubbler is an adjustable high flow emission device available on stake with 1/4" barb inlet. The adjustable bubblers can be extended from the 1/2" drip tubing using 1/4" micro tubing. The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.

By: ssww, 08/22/12

The most versatile gadget for my garden, they can be used anywhere, pots, raised beds, small areas of ground cover....I especially like them in big planters/pots (20-24") where even distribution of water is needed. Being adjustable, they offer you the control of water flow.

I plan to replace most of my drippers with these bubblers.

By: dva1946, 05/01/11

These guys are real winners. We use them in all garden / flower beds, and adjust individual heads to meet the specific location need.

We highly recommend these guys!!

Dave
Lakewood, CO

  • Bubbler pattern: 360° coverage
  • Diameter of Coverage: .7 to 1.9' full circle
  • Flow rates at preset pressure of: 15 PSI is 27 GPH, 20 PSI is 14.3 GPH, 30 PSI is 18.7 GPH , 40 PSI is 21.6 GPH
  • Materials: Polyethylene
  • Operating pressure: 15 to 30 PSI
  • Recommended filtration: 120 mesh
  • Recommended pressure: 25 PSI
  • 360-degree adjustable pattern
  • Can be taken apart for easy cleaning
  • Fingertip low control can be adjusted from 0 to 35 GPH with a shut off option
  • The barbed bubbler Install into a 1/4" micro tubing or on to a 1/2" drip tubing
  • The stake bubbler Install into a 1/4" micro tubing or only
  • UV protected; manufactured from superior durable plastics for long life against degradation