Free shipping on orders $149 $99 & up. exclusions apply

360-Degree Adjustable Umbrella Pattern Bubbler on a Stake


360-Degree Adjustable Umbrella Pattern Bubbler on a Stake
In Stock

The umbrella bubbler is an adjustable high flow emission device available on a stake. For use near groups of plants or under a large plant, the adjustable bubbler on stake model MS026 has a gentle stream umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.

Part #: MS026
$0.80 - $0.89 ea.
+ 1$0.89 ea.
+ 101$0.86 ea.
+ 501$0.80 ea.
  ( 1 rating/review )

The umbrella bubbler is an adjustable high flow emission device available on stake with a 1/4" barb inlet. For use near groups of plants or under a large plant, the adjustable bubbler on stake model MS026 has a gentle stream umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.
The adjustable bubblers on a stake has a barb inlet that can be used with 1/4" micro tubing. The adjustable bubbler discharges the suggested flow at a pressure of 20, 30 and 40 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.

By: haynes1118, 06/17/13

  • Flow rate adjustable: 0 GPH to 30 GPH
  • Flow rates at preset pressure of: 20 PSI is 14.3 GPH, 30 PSI is 18.7 GPH , 40 PSI is 21.6 GPH
  • Materials: Polyethylene
  • Operating pressure: 20 to 40 PSI
  • Pattern: 360° , Adjustable
  • Recommended filtration: 120 mesh
  • Recommended pressure: 30 PSI
  • 360-degree adjustable pattern
  • Can be taken apart for easy cleaning
  • The barbed bubbler Install into a 1/4" micro tubing or on to a 1/2" drip tubing
  • The stake bubbler Install into a 1/4" micro tubing or only
  • UV protected; manufactured from superior durable plastics for long life against degradation