Free shipping on orders $149 $99 & up. exclusions apply

Micro sprinklers and micro sprayers (toggle)


About micro sprayers and foggers

Micro sprinklers and micro sprayers are low flow watering devices method, smaller in size and with flow rate capability than a conventional sprinklers heads. They are placed on a close spacing in a rectangular or triangular spacing for better overlapping and higher uniformity under fruit trees, crops, greenhouse, hot houses, other densely planted field crops and widely work best in low wind area. Micro sprinkler or micro sprayers are an efficient and reliable method to apply water. It is highly recommended to consider the area, the application rate and the micro sprinkler droplet size in order to prevent droplets drifting under windy condition.

Micro sprinklers and micro sprayers deliver water in low application rates and in fine drops. Such drops size can easily be affected in windy location and the micro sprayer’s small size droplet can dissipate in the air, even under low to moderate wind conditions, affecting the micro sprayer’s uniformity. In order to ensure a high uniformity of application, the micro sprinklers and micro sprayers spacing should be decreased and not exceed 50 percent of the diameter or coverage suggested by the manufacturer.  In order to mitigate the adverse effects of wind on uniformity, a relatively large number of micro sprinklers or micro sprayers per area should be operated simultaneously

Unlike drippers, micro sprayers and foggers are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the sprayer from clogging. Micro sprayers have no moving parts and produce small sized droplets, providing a low precipitation rate, and allowing longer watering time with less runoff. The Drip Store has a range of micro sprayers and foggers that are used in agriculture, nurseries, greenhouses, professional landscapes, and homes. The micro sprayers are designed for areas where drippers may not be as practical, such as for ground cover and trees. Micro sprayers are used extensively in agriculture for orange and almond groves, by installing one sprayer per tree. Micro sprayers are rated by flow rate and wetting diameter or radius. The Drip Store selection, from various manufacturers, is available in flow rates from .8 GPH up to 30 GPH, and with diameters from 1' to 26'.
Sprayers Available:


SPRAY JET ON THREADED BARB, MODEL# MS001, MS002, AND MS003, AND SPIKE, MICRO SPRAYER WITH 24" MICRO TUBING, BARB, AND 13" SPIKE, COMPLETE ASSEMBLY MODEL # MSA001, MSA002 AND MSA003: MSA001 and MS001 have 12 jets in a 360° pattern with coverage of up to a 12' full circle, MSA002 and MS002 spray 180° with coverage of up to an 8' radius, and MSA001 and MS001 spray 90° with coverage of up to a 7' radius. All the models have a flow rate of up to 14 GPH. Ideal use for these models is for groundcover, flowerbeds, and shrubs. The 10/32 thread models can be installed directly to 1/2" drip hose, using models A123, A124, and A124 1/4" PE riser with barb, or raised above the ground with model A128 spike assembly. Ideal spacing for the three models: 4' to 6' between the sprayers.

12" POP-UP SPRAYERS ON 1/2" MPT, MODEL # MP001, MP002, AND MP003: The three models are available with coverage of up to 12'. Model MP001 has 12-jets in a 360° pattern with coverage of up to a 12' full circle, model MP002 180° with coverage of up to an 8' diameter, and model MP003 90° with coverage of up to a 7' diameter. All three models have flow rates of up to 14 GPH. Ideal use for these pop-ups is for groundcover, flowerbeds, and shrubs. The pop-up should have the stem 3" to 5" above the ground and should be installed in 4'-6' spacing.

12 JET MICRO SPRAYER WITH 24" MICRO TUBING, BARB, AND 13" SPIKE, COMPLETE ASSEMBLY, MODEL # MSA006: 12 jets provide a flow rate of 10 GPH and coverage up to 13' full circle. Use for small and medium size trees with one micro sprayer per tree.

12 JET MICRO SPRAYER WITH 10/32 THREAD, MODEL # MS006: 12 jets provide a flow rate of 10 GPH and coverage up to 5' full circle. The diameter throw is 3-6 feet depending on height and degrees. Attach to models A123, A124 and A124 1/4" PE riser with barb, model T009 or T028 1/4" micro tube, or 1/2" poly line. Jet sprayers can be used with additional inserts - models DF090 and DF180 for 90° and 180° with up to a 4' radius. The insert heads can be snapped to the top of the jet.

ADJUSTABLE SPRAY JETS ON 10/32 THREAD MODEL # MS014, MS015, AND MS016: # MS014 sprays 360° with coverage of up to 26 feet. #MS015 sprays 180° with coverage of up to a 9' radius, and # MS016 sprays 90° with coverage of up to an 8' radius. The 10/32 thread models can be installed directly to 1/2" drip hose, using models A123, A124 and A124 1/4" PE riser with barb, or raised above the ground with model A128 spike assembly. All three models have adjustable flow rates from 0 to 25 GPH. The ideal spacing for all models is 4' to 9' between the spray jets.

ADJUSTABLE SPRAY JETS ON 10/32 THREAD MODEL # MS020, MS021, AND MS022 OR WITH 24" MICRO TUBING, BARB, AND 13" SPIKE, COMPLETE ASSEMBLY MODEL # MSA020, MSA021 AND MSA022: # MSA020 and MS020 spray 360° with coverage of up to 25 feet, #MSA021 and MS021 spray 180° with coverage of up to an 8' radius, and #MSA022 and MS022 spray 90° with coverage of up to a 7' radius. The 10/32 thread models can be installed directly to 1/2" drip hose, using models A123, A124, and A124 1/4" PE riser with barb, or raised above the ground with model A128 spike assembly. All three models have adjustable flow rates from 0 to 30 GPH. The ideal spacing for all models is 5' to 8' between the spray jets.

ADJUSTABLE SPRAYER ON-A-SPIKE MODEL # MSO23: Has a flow rate from 0 to 20 GPH. When the cap is rotated the flow from this sprayer and the radius of the wetted area can be adjusted from a small diameter to up to 12', to off, allowing the changing of flow for each individual sprayer. Twisting the dial on the sprayer towards the "+" or the " -" signs will allow you to increase or decrease the flow. The sprayer has a 5" spike and 1/4" side inlet.


Misters Available:
FOGGER/MISTER ON 10/32 THREAD MODEL # MS007: Is a fine spray mister with a flow rate of 7 GPH and coverage of up to a 5' full circle when installed directly into 1/2" drip hose, using models A123, A124, and A124 1/4" PE riser with barb, or up to a 7' full circle when raised above the ground with model A128 spike assembly. Ideal use of the mister is in small flowerbeds or inside a greenhouse in a spacing of 3'to 5' apart.

POT AND BASKET MISTER WITH BARBED ELBOW MODEL MS008: This mister gives a very fine spray with a flow rate of 2 GPH and coverage between 8" to 2' full circle when used above the plant. Ideal use of the mister is on 8" to 20" diameter pots and baskets with the mister hung upside down 5" to 24" above the plant using 1/4" micro tubing.

MISTING NOZZLES ON 1/4" BARB MODEL MS013: Full circle fogger with a fine spray that can operate in a pressure range of 25 to 40 PSI with flow rates of 3 to 4 GPH. The foggers can create a cooling effect above the plant canopy, or can be used to water a group of plants inside a structure, or for individual pots and containers. We recommend installing the misting nozzles 4' to 6' above the ground with 2' to 4' spacing for maximum cooling effect, or one per each container.

MISTING NOZZLES ON 1/2" FPT BASE MODEL MS017: This 2 GPH misting fogger with 1/2" FPT base can be used to mist above the plants and flowers inside or outside closed structures for cooling humidity control and for very light irrigation . The mister has a very fine mist and can be used in 3 to 4 feet spacing upside down. 1/2" female pipe thread base fits on 1/2" MPT riser. For maximum cooling effect allow 3 to 4 feet between the misters, and 4 to 6 feet between the lines.