The Drip Store carries in stock a wide range of drip line, with spacing from 12", 18", 24" to 30", in 100', 500 and 1000' lengths, with flow rates of .5 or 1 GPH. Our inline pressure compensating drippers are fully self-contained units that are inserted into the drip tubing, or welded into the interior wall of the drip tubing, at a preset spacing. Both tubing and drippers are manufactured from high quality material that can withstand chemicals and fertilizers. Inline PC drippers contain a diaphragm that continuously adjusts to varying water pressure to ensure a constant flow rate. The diaphragm inside the inline dripper allows particles to pass through the dripper without harming it, providing reliable performance and a longer life. This method of continuous flushing and wide flow path allows the dripper to operate at optimal flow rates under extreme conditions. PC inline drippers discharge the same amount of water under a wide pressure range, providing high uniformity and longer run on any topography. All our 1/2" drip line are 1/2" (16 mm) in size and are used with a 16 mm barb fittings and 1/2" green color compression fittings
The Drip Store also has brand name drip tape in 500', and 5000'. The 500' is15 mil, and the 5000' is 12.5 mil, both with 12" drippers spacing. The drip tape is a flat tape with pre-inserted drippers every 12", the line expands when filled with water. Ideal to use in vegetable gardens or where total saturation coverage is desired, it is used with drip tape fittings. Drip tape can be installed above or below the ground with emitters facing up. Drip tape fittings are different in design from those used with 1/2" drip hose, in that they work with a twisting lock device rather than with compression.
In our line we have a 1/4" laser drilled soaker hose that has a laser drilled hole every 6" or 12" for saturation coverage of the desired area. Designed for short runs up to a maximum of 30 feet, with a flow rate of .5 GPH per foot. Use it in containers, or for small, narrow watering areas. An arrow printed on the soaker hose shows the direction of the water. It may be extended from 1/2" drip tubing or 1/4" distribution tubing.