DIG Corporation 1/2" .620 O.D. Compression Fittings

The Drip Store 1/2" compression drip fittings with .620 OD (Green Insert) are used in the installation of drip irrigation using .620 OD, .630 OD drip tubing and 16 mm drip line.

Category: 1/2" & 3/4" Compression

Available Models		Part	Price
	1/2" .700 OD x .620 OD Compression Reducing Coupling	LF017	$0.46 ea.
1 review	1/2” MNPT X .620 OD compression adapters, green	LF400	$0.46 ea.
	1/2" .620 OD Compression Coupling x 1/2" PVC slip	A048	$0.54 ea.
1 review	1/2" .620 OD Compression Coupling	LF002	$0.48 ea.
	1/2" .620 OD Compression 3/4" FHT Swivel Adapter with Screen	LF004	$0.99 ea.
1 review	1/2" .620 OD Compression Tee	LF006	$0.72 ea.
	1/2" .620 OD Compression Elbow	LF008	$0.70 ea.
	1/2" .620 OD Compression Tee with 3/4” FHT Swivel Adapter with Screen	LF010	$1.63 ea.
	1/2" .620 OD Compression 3/4" FNPT Swivel Adapter with Screen	LF012	$0.95 ea.
	1/2" .620 OD Compression Hose End with 3/4" FHT Flush Cap	LF014	$0.58 ea.
	1/2" .620 OD Compression 1/2" Insert, Poly to 1/2" PVC Slip	LF016	$0.25 ea.
	1/2" .620 OD Compression 3/4" MHT Adapter	LF081	$0.50 ea.
	1/2" .620 OD Compression 3/4" MPT Adapter	LF084	$0.50 ea.
	1/2" .620 OD Compression Tee with 3/4" MHT	LF155	$0.91 ea.
	3/4" FNPT Swivel Tee with Washer x 1/2" .620 OD Compression	LF165	$1.04 ea.
	1/2" .620 OD Compression End Cap with Flush Valve	LF324	$1.81 ea.

Description
Specifications
Features
Instructions

The Drip Store's high impact 1/2" compression drip fittings with .620 OD are available in various configurations and uses in the installation of 1/2" drip tubing with.620 OD, .630 OD and 16mm drip line. By using a simple wrist action, the tubing is walked into the fittings for a very tight fit. No tools, glue, or clamps are required. Our .620 OD compression fittings are color coded and use a green insert. Our compression fittings from DIG Corp are made of high impact UV resistant plastic.

Closing and opening pressure at: 7 PSI

Color

LF017, LF400, A048, LF002, LF004, LF006, LF008, LF010, LF012, LF014, LF016, LF081, LF084, LF155, LF165, LF324 : Green

Materials

LF017, LF400, A048, LF002, LF004, LF006, LF008, LF010, LF012, LF014, LF016, LF081, LF084, LF155, LF165, LF324 : Body: ABS, Inserts: Polycarbonate

Maximum pressure

LF017, LF400, A048, LF002, LF004, LF006, LF008, LF010, LF012, LF014, LF016, LF081, LF084, LF155, LF165, LF324 : 60 PSI

Operating pressure

LF017, A048, LF002, LF004, LF006, LF008, LF010, LF012, LF014, LF016, LF081, LF084, LF155, LF165, LF324 : 10 to 30 PSI

Color coded

Fits all DIG 1/2" polyethylene tubing with .620 OD, .630 OD and 16 mm drip line

Made with high impact UV resistant plastic

Secure and easy installation without glues or clamps

Use with any PVC glue

Installation for 1/2" Compression Fittings
To connect the 1/2" drip tubing, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2" to 3/4" of the drip tubing is inside the fitting.

Note: For other size tubing use the fittings with black insert for DIG® (.700 OD), blue insert for Toro® blue stripe tubing (.710 OD)and the fittings with green insert for Rain Drip® and Rain Bird®(.620 OD)