Free shipping on orders $149 $99 & up. exclusions apply

1/2" .710 Compression Fittings


1/2" .710 Compression Fittings

The Drip Store's 1/2" compression drip fittings with .710 OD (Blue Insert) are used in the installation of drip irrigation using .710 OD drip tubing.

Category: 1/2" & 3/4" Compression

Available ModelsPartPrice
LF019 : 1/2 in.  .710 OD Compression Hose End with 3/4 in.  FHT Flush Cap
1/2" .710 OD Compression Hose End with 3/4" FHT Flush Cap LF019$0.57 ea.
LF020 : 1/2 in.  .710 OD Compression Coupling
1/2" .710 OD Compression Coupling LF020$0.47 ea.
LF021 : 1/2 in.  .710 OD Compression Elbow
1/2" .710 OD Compression Elbow LF021$0.69 ea.
LF022 : 1/2 in.  .710 OD Compression Tee
1/2" .710 OD Compression Tee LF022$0.71 ea.
LF077 : 1/2 in.  .710 OD Compression 1/2 in.  Insert, Poly to 1/2 in.  PVC Slip
1/2" .710 OD Compression 1/2" Insert, Poly to 1/2" PVC Slip LF077$0.26 ea.
LF078 : 1/2 in.  .710 OD Compression 3/4 in.  FHT Swivel Adapter with Screen
1/2" .710 OD Compression 3/4" FHT Swivel Adapter with Screen LF078$1.03 ea.
LF079 : 1/2 in.  .710 OD Compression Tee with 3/4” FHT Swivel Adapter with Screen
1/2" .710 OD Compression Tee with 3/4” FHT Swivel Adapter with ScreenLF079$1.70 ea.
LF080 : 1/2 in.  .710 OD Compression 3/4 in.  FNPT Swivel Adapter with Screen
1/2" .710 OD Compression 3/4" FNPT Swivel Adapter with Screen LF080Discontinued
LF083 : 1/2 in.  .710 OD Compression 3/4 in.  MHT Adapter
1/2" .710 OD Compression 3/4" MHT Adapter LF083$0.50 ea.
LF086 : 1/2 in.  .710 OD Compression 3/4 in.  MPT Adapter
1/2" .710 OD Compression 3/4" MPT AdapterLF086$0.50 ea.
LF167 : 1/2 in.  .710 OD Compression Tee with 3/4” FNPT Swivel Adapter with Washer
1/2" .710 OD Compression Tee with 3/4” FNPT Swivel Adapter with Washer LF167$1.04 ea.
LF326 : 1/2 in.  .710 OD Compression End Cap with Flush Valve
1/2" .710 OD Compression End Cap with Flush Valve LF326$1.86 ea.
LF402 : 1/2” MNPT X  .710 OD compression adapters,  blue
1/2” MNPT X .710 OD compression adapters, blue LF402$0.46 ea.

The Drip Store's high impact 1/2" drip compression fittings with .710 OD are available in various configurations and are used in the installation of 1/2" drip tubing with.710 OD. By using a simple wrist action, the tubing is walked into the fittings for a very tight fit. No tools, glue, or clamps are required. Our .710 OD compression fittings are color coded and use a blue insert. Our compression fittings from DIG Corp are made of high impact UV resistant plastic.

  • Color
    • LF019, LF020, LF021, LF022, LF077, LF078, LF079, LF080, LF083, LF086, LF167, LF326, LF402 : Blue
  • Materials
    • LF019, LF020, LF021, LF022, LF077, LF078, LF079, LF080, LF083, LF086, LF167, LF326, LF402 : Body: ABS, Inserts: Polycarbonate
  • Maximum pressure
    • LF019, LF020, LF021, LF022, LF077, LF078, LF079, LF080, LF083, LF086, LF167, LF326, LF402 : 60 PSI
  • Operating pressure
    • LF019, LF020, LF021, LF022, LF077, LF078, LF079, LF080, LF083, LF086, LF167, LF326, LF402 : 10 to 30 PSI
  • Closing and opening pressure at: 7 PSI
  • Color coded
  • Fits all DIG 1/2" polyethylene tubing with .710 OD
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps
  • Use with any PVC glue
    • LF019, LF020, LF021, LF022, LF077, LF078, LF079, LF080, LF083, LF086, LF326 : Installation for 1/2" Compression Fittings

      To connect the 1/2" drip tubing, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2" to 3/4" of the drip tubing is inside the fitting.

      Note: For other size tubing use the fittings with black insert for DIG® (.700 OD),  blue insert for Toro® blue stripe tubing (.710 OD)and the fittings with green insert for Rain Drip® and Rain Bird®(.620 OD)

       

    • LF167 : 1/2" .710 OD Compression Fittings Suggested Installation Steps

      Installation:

      To connect the 1/2” drip tubing with .710 OD, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2" to 3/4" of the drip tubing is inside the fitting.

      Note: For other size tubing use the fittings with black insert for DIG® (.700 OD),  blue insert for Toro® blue stripe tubing (.710 OD)and the fittings with green insert for Rain Drip® and Rain Bird®(.620 OD)