Replacement Stainless Steel Screen for 1-1/2" Filters
The Drip Store provides a wide range of replacement plastic or stainless steel screens for our 3/4”, 1” 1-1/2” and 2” filters. Use the replacement screen to replace or update the screen in your filter.
|Model F325 1-1/2" Stainless Steel Replacement Screen , 80 mesh, blue||F325||$44.21 ea.|
|Model F326 1-1/2" Stainless Steel Replacement Screen, 120 mesh, brown||F326||$45.12 ea.|
|Model F327 1-1/2" Stainless Steel Replacement Screen, 150 mesh, green||F327||$45.12 ea.|
|Model F334 1-1/2" Stainless Steel Replacement Screen, 200 mesh, purple||F334||$49.59 ea.|
The 3/4”, 1”, 1-1/2” and 2” filter screens are readily accessible for easy removal and cleaning. These screens can be used as replacement screens in any of The Drip Store’s current line of screen filters.
Screen filters are the most common filters used in the irrigation industry and in most cases the least expensive. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water, such as sand and other small elements often found in city water.
The screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape. The screen filters are cleaned by removing and hand cleaning the screen.
- F325 : Blue
- F326 : Brown
- F327 : Green
- F334 : Purple
Maximum flow rate
- F325, F326, F327, F334 : O-ring: EPDM
- F325, F326, F327, F334 : Screen: Stainless Steel
Maximum working temperature
- F325, F326, F327, F334 : 1-1/2: " 50 GPM
- F325, F326, F327, F334 : 130 degree F
- F325, F326, F327, F334 : up to 120 PSI
- F325, F326, F327, F334 : 1-1/2" or 2"
Available sizes: 3/4", 1", 1-1/2" and 2"
Available with 3/4", 1", 1-1/2" and 2" in-line valve
Color-coded replacement screens
Easy maintenance: the screen can be extracted from the filter for easy cleaning
For 1 1/2" filters: Model #’s F321 and F322
Large filtration area allows longer intervals between flushing
Low friction loss
Molded plastic construction with stainless steel screen
Non corrosive materials
Polyester screen and Stainless screen cylinder chemical resistance:
Rubber "O" rings on both ends ensure a quality seal
Screens have excellent resistance to most common chemicals
Wide range of polyester and stainless steel screens in 40 to 200 mesh
Acid: very good resistance depending on concentration and temperature. Resistance to most mineral acids is excellent.
Alkali: limited resistance depending on concentration and temperature. Excellent resistance to low concentration lyes. Dissolves in highly concentrated lyes at higher temperatures.
Generally the screens show no evidence of toxicity and have excellent resistance to decay and bacteria.
Organic solvents: excellent resistance. Some phenolic compounds and hot nitrobenzene dissolve the screens
Oxidizing agents: good resistance