Category: Spot Spitters
|Spot-Spitter, 90 Degree Spray Stick, Flow Rate 2.4 -3.6 GPH Color Gray||D305||$0.18 ea.|
|Spot-Spitter, 90 Degree Spray Stick, Flow Rate 6.2 -9.1 GPH Color Brown||D304||$0.18 ea.|
|Spot-Spitter, 160 Degree Spray Stick, Flow Rate 3.6 -4.8 GPH Color Orange||D303||$0.18 ea.|
|Spot-Spitters, 160 Degree Spray Stick, Flow Rate 4.8-6.3 GPH Color Lt Green||D302||$0.18 ea.|
|Spot-Spitters, 160 Degree Spray Stick, Flow Rate 9.6-13.2 GPH Color Green||D301||$0.18 ea.|
|Spot-Spitters, 160 Degree Spray Stick, Flow Rate 10.2-17.4 GPH Color Black||D300||$0.18 ea.|
|Spot-Spitters, 360 Degree Spray Stick, Flow Rate 9.0-12.6 GPH Color Blue||D306||$0.18 ea.|
The SPOT-SPITTER spray stick from John Deere Water Product line is one of the most cost-effective, versatile solutions for your nursery watering application.
Low cost and ease of installation have made this product line a favorite among nurseries and growers worldwide. With a wide range of flow rates and wetting patterns, and using specially sized 1/8” micro tubing, the right spray stick to fit your nursery application is easy to choose. This range of spray sticks are color-coded and with 90, 160, and 360-degree spray patterns.
The Drip Store includes all the components needed for installation.
To install the SPOT-SPITTER use the suggested micro tubing with the correct ID and OD. To replace the spray stick, just pull it out of the micro tubing, and replace with a new head of the same color. Make sure to flush the line before inserting the new spray stick. No tool or glue is required.
To install the SPOT-SPITTER into the drip tubing lateral, first select the flow rate and the spray stick degree of coverage, then insert the spray stick into the 1/8” micro tubing. Next, punch a hole into the side of the drip tubing using a 4 mm punch, and then insert the micro tubing into the drip tubing. No barb connector or other parts are needed.