DIG Corporation's Single Bridge Insect Proof Micro Sprinkler
The bridged type micro sprinklers have 360-degree coverage with various diameters, 16' up to 28' @ 30 PSI. When the spinner closes at the end of the irrigation cycle insects are prevented from entering the spinner. This micro sprinkler is suited for irrigation under tree canopies, for seedlings, young saplings, mature trees, and in greenhouses and nurseries. The fully assembled insect proof micro sprinkler comes with a spike, 24” micro tubing and barb.
Categories:
Micro Sprinklers, DIG Micro Sprinklers
| Available Models | Part | Price | | |
|---|
 | Bridged Micro Sprinkler Assembly with 27 GPH Blue Nozzle | MSA031 | $1.35 - $1.68 ea. | |
 | Bridged Micro Sprinkler Assembly with 36 GPH Yellow Nozzle | MSA032 | $1.35 - $1.68 ea. | |
 | Bridged Micro Sprinkler Assembly with 9 GPH Lt Blue Nozzle | MSA060 | $1.35 - $1.68 ea. | |
 | Bridged Micro Sprinkler Assembly with 15 GPH Gray Nozzle | MSA062 | $1.35 - $1.68 $1.51 ea. clearance item 63 left | |
 | Bridged Micro Sprinkler Assembly with 32 GPH Red Nozzle | MSA064 | $1.35 - $1.68 ea. | |
Droplet Size
- MSA031, MSA032, MSA060, MSA062, MSA064 : Medium
Flow rate
- MSA062 : 15 GPH @ 30 PSI with coverage of 23' diameter
- MSA031 : 27 GPH @ 30 PSI with coverage of 23' diameter
- MSA064 : 32 GPH @ 30 PSI with coverage of 24' diameter
- MSA032 : 36 GPH @ 30 PSI with coverage of 28' diameter
- MSA060 : 9 GPH @ 30 PSI with coverage of 16' diameter
Materials
- MSA031, MSA032, MSA060, MSA062, MSA064 : Polyacetal
Operating pressure
- MSA031, MSA032, MSA060, MSA062, MSA064 : 25 to 30 PSI
Recommended filtration
- MSA031, MSA032, MSA060, MSA062, MSA064 : 120 mesh
Recommended micro-sprinkler spacing
- MSA031 : one per tree or with the blue nozzle 6' to 10' apart
- MSA062 : one per tree or with the gray nozzle 8' to 10' apart
- MSA060 : one per tree or with the lt blue nozzle 6' to 8' apart
- MSA064 : one per tree or with the red nozzle 8' to 10' apart
- MSA032 : one per tree or with the yellow nozzle 14' to 16' apart
Available completely assembled on 13" spike with 24” (.160 ID x .270 OD) micro tubing and barb
Excellent performance with uniform water distribution
Insect proof; the spinner closes at the end of the irrigation cycle
Large water passage
Made of durable materials, ensuring resistance to most chemicals and fertilizers
Recommended filtration: 120 mesh
Trouble free operation even at low pressure
-
Installation for Bridge Type Micro Sprinkler
To install the micro sprinklers, first select the flow rate and check the micro sprinkler recommended spacing. If using the complete assembly micro sprinkler with the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.
