3/4" Spin-Loc Fittings
Category:
1/2"-1” Spin-loc
| Available Models | Part | Price | | |
|---|
 | 3/4" Spin-lock Connector with 3/4" MHT | LF070 | $1.49 ea. | |
 | 3/4" x 3/4" Spin-Loc Connector | LF071 | $1.59 ea. | |
 | 3/4" x 3/4" Spin-Loc Connector Elbow | LF074 | $2.76 ea. | |
 | 3/4" x 3/4" x 3/4" Spin-Loc Connector Tee | LF072 | $3.94 ea. | |
 | 3/4” FHT Swivel Tee x 3/4" x 3/4" Spin-Loc | LF110 | $4.76 ea. | |
 | 3/4" Spin-Loc Line End with Flush Valve | LF073 | $2.19 ea. | |
 | 3/4" Male Pipe Thread x 3/4" Spin-Loc Connector | LF075 | $1.38 ea. | |
 | 3/4” FHT Swivel Adapter with Washer x 3/4" Spin-Loc Connector | LF322 | $2.04 ea. | |
The Drip Store’s 3/4” Spin-Loc fittings are used for the installation of 3/4” drip tubing or drip line (also available in 1/2” and 1”) with many configurations to meet the varying requirements in the installation and layout of drip tubing or drip line. The Drip Store’s Spin-Loc fittings can be easily removed and reinstalled, and their tight seals work exceptionally well for a wide range of applications.
Flush Valve Closing Pressure
- LF071, LF074, LF072, LF110, LF073, LF075, LF322, LF120 : 7 PSI
Flush Valve Opening Pressure
- LF071, LF074, LF072, LF110, LF073, LF075, LF322, LF120 : 7 PSI
Maximum pressure
- LF070, LF071, LF074, LF072, LF110, LF073, LF075, LF322, LF120 : 60 PSI
Recommended pressure
- LF071, LF074, LF072, LF110, LF073, LF075, LF322, LF120 : Up to 30 PSI
Size
- LF070 : 3/4" .820 ID x .940 OD
Available to fit 1/2", 3/4" and 1” drip tubing or drip line
Made with high impact UV resistant plastic
No glue or tools are required
Secure and easy installation without glues or clamps
Tight seal, ensured by the rubber "O" ring on the barb ( 3/4" & 1" do not use an "O" ring)
-
LF071, LF074, LF072, LF110, LF073, LF075, LF322, LF120 :
Installation for Spin-Loc Fittings
The ½”, ¾” and1” Spin-Loc fittings uses a sleeve assembly over a body with a barb insert, allowing the user to easily install the many fittings configurations that night be needed throughout the installation of the drip tubing. The sleeve makes the Spin-Loc fittings easier to install and tighten. An advanced sealing interface with a long barb provides guides for the Spin-Loc to slide over the barb for a secure seal. Our Spin-Loc fittings are made of high impact UV resistant plastic and can last for many years.
To connect the spin-lock fitting to the drip tubing or drip line we provides a number of steps
Step 1: First, turn the sleeve of the fitting counter-clockwise
Step 2: Push the drip tubing or drip line over the barb all the way in or as much as you can
Step 3: Threaded the sleeve over the drip tubing or drip line to secure.
Using the Spin-Loc fittings, drip tubing can be installed easily either above or below the ground. Use the Spin-Loc fittings to connect the drip tubing with other sections of drip tubing or PVC pipe.
