Free shipping on orders $149 & up. exclusions apply

1" Spin-Loc Fittings


1" Spin-Loc Fittings

Category: 1/2"-1” Spin-loc

Available ModelsPartPrice
LF102 : 1 in.  x 1 in.  Spin-Loc Connector
1" x 1" Spin-Loc Connector LF102$2.67 ea.
LF105R : 1 in.  MPT x 1 in.  Barb for .940 OD Polytubing
1" MPT x 1" Barb for .940 OD PolytubingLF105R$2.12 ea.
LF115 : 1 in.  x 3/4 in.  x 1 in.  Spin lock reducer tee
1" x 3/4" x 1" Spin lock reducer teeLF115$8.21 ea.
LF120 : 1 in.  x 1/2 in.  x 1 in.  Spin loc reducer tee
1" x 1/2" x 1" Spin loc reducer teeLF120$7.29 ea.
LF344 : 1 in.  barb x 1 in.  Socket Barbed Fitting
1" barb x 1" Socket Barbed Fitting LF344$1.59 ea.
LF104 : 1 in.  x 1 in.   Spin-Loc  Elbow
1" x 1" Spin-Loc ElbowLF104$5.43 $4.89
LF103 : 1 in.  x 1 in.  x 1 in.  Spin-Loc Connector Tee
1" x 1" x 1" Spin-Loc Connector TeeLF103$9.10 ea.
LF108 : 1 in.  Swivel Tee (1 in.  Spin-loc x  3/4” FHT  x 1 in.   Spin-Loc)
1" Swivel Tee (1" Spin-loc x 3/4” FHT x 1" Spin-Loc) LF108$5.09 ea.
LF106 : Line End with 1 in.  Spin-Loc x  Flush Valve
Line End with 1" Spin-Loc x Flush Valve LF106Discontinued
LF105 : 1 in.  Male Pipe Thread x 1 in.  Spin-Loc Connector
1" Male Pipe Thread x 1" Spin-Loc ConnectorLF105Discontinued
LF109 : 3/4” FHT Swivel Adapter with Washer x 1 in.  Spin-Loc Connector
3/4” FHT Swivel Adapter with Washer x 1" Spin-Loc ConnectorLF109$4.19 ea.
LF125 : 1 in.  Spin Loc x 5/8 in.  Drip Tape Reducer Tee
1" Spin Loc x 5/8" Drip Tape Reducer TeeLF125$9.44 ea.

The Drip Store’s 1” Spin-Loc fittings are used for the installation of 1” drip tubing or drip line (also available in 1/2" and 3/4") with many configurations to meet the varying requirements in the installation and layout of drip tubing or 1/2" drip line. The Drip Store’s Spin-Loc fittings can be easily removed and reinstalled, and their tight seals work exceptionally well for a wide range of applications.

  • Flush Valve Closing Pressure
    • LF102, LF115, LF120, LF104, LF103, LF108, LF106, LF105, LF109, LF125 : 7 PSI
  • Flush Valve Opening Pressure
    • LF102, LF115, LF120, LF104, LF103, LF108, LF106, LF105, LF109, LF125 : 7 PSI
  • Maximum pressure
    • LF102, LF115, LF120, LF104, LF103, LF108, LF106, LF105, LF109, LF125 : 60 PSI
  • Recommended pressure
    • LF102, LF115, LF120, LF104, LF103, LF108, LF106, LF105, LF109, LF125 : Up to 30 PSI
  • Available to fit 1/2", 3/4" and 1” drip tubing or drip line
  • Made with high impact UV resistant plastic
  • No glue or tools are required
  • Secure and easy installation without glues or clamps
  • Tight seal, ensured by the rubber "O" ring on the barb ( 3/4" & 1" do not use an "O" ring)
    • LF102, LF115, LF120, LF104, LF103, LF108, LF106, LF105, LF109, LF125 : Installation for Spin-Loc Fittings
      The ½”, ¾” and1” Spin-Loc fittings uses a sleeve assembly over a body with a barb insert, allowing the user to easily install the many fittings configurations that night be needed throughout the installation of the drip tubing. The sleeve makes the Spin-Loc fittings easier to install and tighten. An advanced sealing interface with a long barb provides guides for the Spin-Loc to slide over the barb for a secure seal. Our Spin-Loc fittings are made of high impact UV resistant plastic and can last for many years.
       
      To connect the spin-lock fitting to the drip tubing or drip line we provides a number of steps
      Step 1: First, turn the sleeve of the fitting counter-clockwise
      Step 2: Push the drip tubing or drip line over the barb all the way in or as much as you can
      Step 3: Threaded the sleeve over the drip tubing or drip line to secure.
       
      Using the Spin-Loc fittings, drip tubing can be installed easily either above or below the ground. Use the Spin-Loc fittings to connect the drip tubing with other sections of drip tubing or PVC pipe.