Fertigation is the application of fertilizer or other water soluble product through the irrigation system using one of many methods of injection system available.
Category: Applicator Accessories
|1/4" MPT x 1/4" MPT Nipple||A103||$1.07 ea.|
|Replacement O-ring for EZ Flo Cap||A106||$1.49 ea.|
|1/4" Rubber "O" Ring||A100||$0.28 ea.|
|Clear 1/4" Micro Feeder Tubing||A104||$2.00 ea.|
|Black 1/4" Micro Feeder Tubing||A105||$1.90 ea.|
|Green Cap Connector||A102G||$1.55 ea.|
|Blue Cap Connector||A102B||$1.55 ea.|
|3/4" Slip x Slip Coupling Connector with Ball Valve||A085||$22.57 ea.|
|1” Slip x Slip Coupling Connector with Ball Valve||A086||$24.52 ea.|
|Replacement Cap||A094||$34.34 ea.|
|3/4" Slip x Slip Coupling Connector||A082||$11.22 ea.|
|1” Slip x Slip Coupling Connector||A083||$12.07 ea.|
|2” Slip x Slip Coupling Connector||A084||$27.42 ea.|
|3/4" FHT x MHT Hose Adapter Connector||A098||$12.75 ea.|
The applicator accessories section provides you with all the parts needed to fix, change or update your applicator. Our hose thread end drip applicator unit can attach to any hose bib so the tank doesn't have to be carried with the hose when feeding, and you can upgrade the unit or change the connection to pipe thread using some of the options we provide.
The slip x slip coupling connectors with ball valves are used to connect the EZ-FLO system to the irrigation main line PVC pipe before or after the valve using the 1/4" flexible tubing provided with every system. They are required for complex system designs or when the elevation of zone valves downstream from the applicator installation point are at an elevation of 10 feet or more above the installation point, or where the user needs more control over the operation of the applicator unit. The ball valve connectors provide the ability to adjust the differential pressure between the inlet and outlet connections to the flow and can ensure that even the heaviest organic fertilizers and supplements can be pulled from the tank. The ball valve connectors also provide the ability to adjust the differential pressure between the inlet and outlet connection to the irrigation flow line. They are also recommended for any application where higher feed rates are desired or heavier fertilizer/supplement products are used. This is especially important to nurseries and growers where higher proportioning rates are needed. Installation instructions
The slip coupling connectors are used to connect the EZ-FLO system to the irrigation main line PVC pipe before or after the valve using the 1/4" flexible tubing provided with every system. The assembly includes a schedule 40 PVC slip coupler with pre-inserted threaded blue and green barb connectors in specific spacing. Install this connector to an existing or new 3/4", 1" or 2” PVC pipe.
By far the most popular connection type for the EZ-FLO system is the standard slip coupling connection. These standard coupling connections can be used in new installations or in retrofits where there is adequate room to add the coupling to the irrigation pipe.