Free shipping on orders $149 & up. exclusions apply

Adjustable Spray Jet on 10/32 Thread


Adjustable Spray Jet on 10/32 Thread

Category: Adjustable Sprayers

Available ModelsPartPrice
MS014 : 360-Degree Adjustable Spray Jet on 10/32 Thread
360-Degree Adjustable Spray Jet on 10/32 Thread MS014$1.56 ea.
MS015 : 180-Degree Adjustable Spray Jet on 10/32 Thread
180-Degree Adjustable Spray Jet on 10/32 Thread MS015$1.56 ea.
MS016 : 90-Degree Adjustable Spray Jet on 10/32 Thread
90-Degree Adjustable Spray Jet on 10/32 Thread MS016$1.56 ea.

The 90°, 180° and 360° pattern adjustable micro sprayers from NDS are available with 10/32 thread. The adjustable micro sprayers have adjustable flow rates of 0 to 25 GPH @ 15 to 30 PSI with a spray pattern of up to 20’ diameter using the 360 degree pattern. This series of adjustable micro sprayers has no moving parts and can be used in home gardens for groundcover, flowerbeds, shrubs and trees.

  • Assembly
    • MS014, MS015, MS016 : 10/32 thread
  • Droplet Size
    • MS014, MS015, MS016 : Large
  • Flow rate
    • MS014, MS015, MS016 : 0 to 25 GPH @ 15 to 30 PSI with coverage of 0 to 20' diameter
  • Pattern
    • MS014, MS015, MS016 : 360°, 180° and 90°
  • Recommended filtration
    • MS014, MS015, MS016 : 120 mesh
  • Recommended pressure
    • MS014, MS015, MS016 : 15 to 30 PSI
  • Adjustable flow control feature allows changing of flow rates depending on plant requirements
  • Available on 10/32 thread
  • Can be attached into the end of 1/4" micro tubing or into the 1/2" drip tubing.
  • Can be replaced with one of three available sprayers
  • Constructed of UV-resistant durable plastic materials, ensuring resistance to most chemicals and fertilizers used in landscape applications
  • Trouble free operation with no moving parts
    • Installation for Adjustable Micro Sprayer

      ·        

      To install the micro sprayer use one of our poly riser assemblies available in our accessories section and install it a minimum of 4” above ground.

      To install the micro sprayer, first select the flow rate if available. Then from the accessories section select the assembly to use. Our suggestion is to use a clip stake and micro tubing with barb. First insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.