Category: Micro Sprayers
|360° Spray Jet on Quick Thread||MS001||$0.23 ea.|
|180° Spray Jet on Quick Thread base||MS002||$0.23 ea.|
|90° Spray Jet on Quick Thread||MS003||$0.23 ea.|
|360° Spray Jet on Stake Assembly||MSA001||$1.10 ea.|
|180° Spray Jet on Stake Assembly||MSA002||$1.09 ea.|
|90° Spray Jet on stake Assembly||MSA003||$1.09 ea.|
|Strip Degree Spray Jet on Stake Assembly||MSA019||$1.14 ea.|
The 90, 180, 360 and strip pattern micro spray jets are available with both a Quick Thread base, or fully assembled with 13” stake, 24” micro tubing and 1/4" barb. The spray jets have flow rates of around 14 GPH @ 30 PSI with spray pattern of up to 12’ diameter using the 360-degree pattern. This two part series of spray jets has no moving parts and can be used in home gardens for ground cover, flowerbeds and trees.
To install the micro sprayer use the complete assembly with spike, micro tubing and barb. The micro sprayer should be used with one of our poly riser assemblies available in our accessories section.
To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayer with the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.