Free shipping on orders $149 & up. exclusions apply

DIG Corporation's Single Bridge, 360° Micro Sprayer Assembly


DIG Corporation's Single Bridge, 360° Micro Sprayer Assembly

The Single Bridge, 360° micro sprayers are available with 13” stake, 24” micro tubing and 1/4" barb. The 360° micro sprayer assembly from DIG Corporation is designed for applications including seedlings, rooting, flowerbeds and for greenhouse use. The sprayers have flow rates of 9 to 42 GPH @ 30 PSI with spray pattern of up to 12’ diameter. The micro sprayers produce fine droplets and are available with a number of flow rates options. This micro sprayer is ideal for maintaining conditions conducive to germination and seedlings.

Categories: Micro Sprayers, Orchard Irrigation, DIG Micro Sprinklers

Available ModelsPartPrice
MSA030 : 360° Micro Sprayer Assembly 9 GPH	 Blue
360° Micro Sprayer Assembly 9 GPH BlueMSA030
$1.38 - $1.67 ea.
MSA043 : 360° Micro Sprayer Assembly 18 GPH Black
360° Micro Sprayer Assembly 18 GPH BlackMSA043
$1.38 - $1.67 ea.
MSA044 : 360° Micro Sprayer Assembly 42 GPH  Brown
360° Micro Sprayer Assembly 42 GPH BrownMSA044
$1.38 - $1.67 ea.

  • Assembly includes
    • MSA030, MSA043, MSA044 : spike, micro tubing and barb
  • Available with three flow rates
    • MSA043 : Black nozzle: 18 GPH with up to 9’ diameter
    • MSA030 : Blue nozzle: 9 GPH with up to 8’ diameter
    • MSA044 : Brown nozzle: 42 GPH with up to 12’ diameter
  • Droplet Size
    • MSA030, MSA043, MSA044 : .0008", very fine at 45 PSI
  • Filter requirement
    • MSA030, MSA043, MSA044 : 120 mesh (130 micron)
  • Materials
    • MSA030, MSA043, MSA044 : Polyacetal
  • Nominal operating pressure
    • MSA030, MSA043, MSA044 : 30 PSI
  • Operating Pressure in Overlapping Irrigation
    • MSA030, MSA043, MSA044 : 35 PSI
  • Operating pressure
    • MSA030, MSA043, MSA044 : 25 to 35 PSI
  • Pattern
    • MSA030, MSA043, MSA044 : 340°
  • Trajectory Angle
    • MSA030, MSA043, MSA044 : Approximately 1°
  • Wetting diameter
    • MSA030, MSA043, MSA044 : up to 12’'
  • Color coded nozzles for flow rate identification
  • Excellent performance with uniform water distribution
  • High uniformity due to distribution accuracy and low precipitation rate
  • Maintains constant humidity if used in greenhouses
  • Modular design allows for a wide range of interchangeable components
    • Installing Micro Sprayer Assembly

      To install the micro sprayer use the complete assembly with spike, micro tubing and barb.

      To install the micro sprayer, first select the flow rate if available, then the pattern. If using the complete assembly micro sprayerwith the spike and the micro tubing, first insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.