Inverted Micro-Sprinkler w/ Micro Tubing Assembly for Greenhouse Applications
Category:
Inverted Microsprinklers
| Available Models | Part | Price | | |
|---|
 | 18 GPH Inverted Micro Sprinkler w/ 12” Micro Tubing and Weight Assembly | GD518-12 | $2.50 ea. | |
 | 18 GPH Inverted Micro Sprinkler w/ 24” Micro Tubing and Weight Assembly | GD518-24 | $2.61 ea. | |
 | 42 GPH Inverted Micro Sprinkler w/ 12” Micro Tubing and Weight Assembly | GD542-12 | $2.50 ea. | |
 | 42 GPH Inverted Micro Sprinkler w/ 24” Micro Tubing and Weight Assembly | GD542-24 | $2.61 ea. | |
The Drip Store’s line of micro sprayers from DIG Corporation are highly efficient spreader type devices, producing a very fine spray pattern used for maintaining conditions conducive to propagation and germination in greenhouse applications. The micro sprayer is designed to operate in an inverted position in greenhouse benches and beds providing the added benefit of keeping the benches clear of lateral pipes and preventing damage to the micro sprayers by any machinery used. The completely assembled unit includes a micro sprayer and anti-leak device to prevent dripping at the end of the irrigation cycle and keep the lateral lines under pressure, saving water and fertilizer that would otherwise be wasted as water drains the line. The assembly can be connected directly to tubing laterals with the 1/4” barb.
Anti-leak closing pressure
- GD518-12, GD518-24, GD542-12, GD542-24 : 10 to 12 PSI
Anti-leak penning pressure
- GD518-12, GD518-24, GD542-12, GD542-24 : 16 to 22 PSI
Available with two flow rates
- GD518-12, GD518-24, GD542-12, GD542-24 : Black nozzle: 18 GPH with up to 9’ diameter @ 30 PSI
- GD518-12, GD518-24, GD542-12, GD542-24 : Brown nozzle: 42 GPH with up to 12’ diameter @ 30 PSI
Bench width layout
- GD518-12, GD518-24, GD542-12, GD542-24 : Black nozzle 10' to 14' apart
- GD518-12, GD518-24, GD542-12, GD542-24 : Brown nozzle 14' to 20' apart
Droplet Size
- GD518-12, GD518-24, GD542-12, GD542-24 : Medium
Filter requirement
- GD518-12, GD518-24, GD542-12, GD542-24 : 120 mesh (130 micron)
Mounting
- GD518-12, GD518-24, GD542-12, GD542-24 : stabilizer weight, anti-leak device, 12" or 24" micro tube and barb
Nominal Flow
- GD518-12, GD518-24, GD542-12, GD542-24 : 30 PSI
Operating Pressure in Overlapping Irrigation
- GD518-12, GD518-24, GD542-12, GD542-24 : 35 PSI
Operating pressure
- GD518-12, GD518-24, GD542-12, GD542-24 : 25 to 35 PSI
Pattern
- GD518-12, GD518-24, GD542-12, GD542-24 : 360°
Recommended layout
- GD518-12, GD518-24, GD542-12, GD542-24 : 2' to 6' above the bench
Recommended spacing
- GD518-12, GD518-24, GD542-12, GD542-24 : Black nozzle 10' to 14' apart
- GD518-12, GD518-24, GD542-12, GD542-24 : Brown nozzle 16' to 20' apart
Trajectory Angle
- GD518-12, GD518-24, GD542-12, GD542-24 : Approximately -5°
Wetting diameter
- GD518-12, GD518-24, GD542-12, GD542-24 : up to 32’
Color coded specially designed nozzle with backup filter
Excellent performance with uniform water distribution
Firm compact construction without a bridge gives a complete 360° circle
Made of durable materials ensuring resistance to most chemicals and fertilizers for long-lived trouble free operation
Modular design allows for a wide range of interchangeable components
Nozzle has a small backup filter for protection against penetration of dirt
Prevent damage to sensitive plants caused by the dripping at the end of irrigation cycle
Trouble free operation even at low pressure
