For use near groups of plants or under a large plant, the adjustable mini bubbler on barb model MS050 and model MS055 on stake have a gentle stream 360-degree umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.
Category: Bubblers
| Available Models | Part | Price | |||
|---|---|---|---|---|---|
 | 360- Degree Adjustable Mini Bubbler Pattern on Barb | MS050 | $0.29 - $0.33 ea. | ||
 | 360- Degree Adjustable Mini Bubbler on Stake | MS055 | $0.51 - $0.56 ea. | ||
The umbrella mini bubbler is an adjustable high flow emission device available on a barb or barb with a stake. The adjustable bubblers on barb can be used with 1/4” micro tubing, inserted directly into the 1/2” drip tubing or connected to with a semi rigid poly riser to elevate the bubbler above ground, these parts can be found under the drip accessories section. The bubbler with the stake can be used with 1/4" micro tubing extended from the 1/2" drip tubing.
The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.
