Free shipping on orders $149 $99 & up. exclusions apply

1/4" Microtubing with .245 OD


1/4" Microtubing with .245 OD

Category: 1/4" Micro Tubing

Available ModelsPartPrice
T010 : 100’, 1/4 in.  Vinyl Brown Micro Tubing  100’, 1/4" Vinyl Brown Micro Tubing T010$6.97 ea.
T037 : 500’, 1/4 in.  Vinyl Brown Micro Tubing 500’, 1/4" Vinyl Brown Micro TubingT037$35.82 ea.

The Drip Store vinyl 1/4" micro tubing is available in several colors and lengths of up to 3000’. Our commercial grade flexible vinyl micro tubing is made of the highest quality resins and is UV resistant. Available in 50', 100’, 500', 1000' and 3,000' The Drip Store micro tubing is used for a wide range of applications. The 1/4" micro tubing can be used as a feeder line from 1/2" poly tubing to extend drip emitters or micro sprinklers, with our 4, 6 and 12 outlet drip emitters and for a complete 1/4" drip system.

  • Bending radius
    • T010, T037 : 3"
  • Materials
    • T010, T037 : Vinyl
  • Maximum flow rate
    • T010, T037 : 35 GPH per line
  • Operating pressure
    • T010, T037 : up to 60 PSI
  • Size
    • T010, T037 : 1/4" .156 ID x .245 OD
  • Stiffness
    • T010, T037 : 90 shore
  • Warranty
    • T010, T037 : Five year manufacturer’s limited warranty
  • Available in 100' and 500' coils
  • UV resistant
  • Use ¼” barbed fittings
    • Installation Methods using 1/4" Micro Tubing

      The basic use of 1/4" the micro tubing is as a feeder line from the 1/2" drip tubing, with the 12 outlet drip emitter and as part of a complete system using the 1/4" as the main lateral. To connect the micro tubing to the drip tubing, first, insert a 1/4" barb or 1/4" tee into the micro tubing, then, use the punch to make a hole in the drip tubing and then, insert the barb into the hole in the drip tubing. Use the micro tubing as a feeder line to reach plants or clusters of plants that are away from the drip tubing and install a dripper or micro sprayer at the end of the micro tubing.