Free shipping on orders $149 $99 & up. exclusions apply

Spot-Spitter Spray Sticks, Down-Facing


Spot-Spitter Spray Sticks, Down-Facing

The downward facing spray pattern in the SPOT-SPITTER spray stick system from John Deere Water Product line is one of the most cost-effective, versatile solutions for your nursery watering application.

Category: Spot Spitters

Available ModelsPartPrice
D310 : Spot-Spitter, Down Spray Stick, Flo Rate 3.6 GPH Color Orange,
Spot-Spitter, Down Spray Stick, Flo Rate 3.6 GPH Color Orange, D310$0.13 ea.
D313 : Spot-Spitter, Down Spray Stick, Flo Rate 4.8 GPH Color L. Green
Spot-Spitter, Down Spray Stick, Flo Rate 4.8 GPH Color L. GreenD313$0.13 ea.

These spot spitters have a downward facing spray pattern which prevents overspray on smaller nursery containers.

The SPOT-SPITTER spray stick from John Deere Water Product line is one of the most cost-effective, versatile solutions for your nursery watering application.

Low cost and ease of installation have made this product line a favorite among nurseries and growers worldwide. With a wide range of flow rates and wetting patterns, and using specially sized 1/8” micro tubing, the right spray stick to fit your nursery application is easy to choose. This range of spray sticks are color-coded and with 90, 160, and 360-degree spray patterns.

The Drip Store includes all the components needed for installation.

  • Droplet Size
    • D310, D313 : Small
  • Filter requirement
    • D310, D313 : Minimum of 120 Mesh
  • Flow rate
    • D310 : 3.6 to 4.8 GPH
    • D313 : 4.8 to 6.3 GPH
  • Micro tubing size used
    • D310, D313 : 1/8" with .125 ID x 0.187 OD (poly)
  • Operating pressure
    • D310, D313 : 15 to 25 PSI
  • Pattern
    • D310, D313 : 90°, 160° or 360°
  • Standard length stake:
    • D310, D313 : 4.8"
  • Made of durable materials, ensuring resistance to most chemicals and fertilizers
  • SPOT-SPITTER is for use in pots, boxes or containers in nursery or home applications
  • The SPOT-SPITTER has a spray direction indictor
  • Trouble free operation even at low pressure
  • Trouble free operation with no moving parts
    • Installation for Spot Spitters

      To install the SPOT-SPITTER use the suggested micro tubing with the correct ID and OD. To replace the spray stick, just pull it out of the micro tubing, and replace with a new head of the same color. Make sure to flush the line before inserting the new spray stick. No tool or glue is required.

      To install the SPOT-SPITTER into the drip tubing lateral, first select the flow rate and the spray stick degree of coverage, then insert the spray stick into the 1/8” micro tubing. Next, punch a hole into the side of the drip tubing using a 4 mm punch, and then insert the micro tubing into the drip tubing.  No barb connector or other parts are needed.