2" Heavy-Duty Super Disc Filter, 120 mesh disc (red)
Operating pressure: up to 120 PSI
Recommended flow rate: up to 110 GPM
Filter Weight: 28 lbs
Available in three filtration degrees
Appications:
Irrigation
Municipal water supply
Features:
Grooved plastic discs stacked together to form the filtering elements
Large filtration area with a grooved disc structure design.
Sediments accumulate on the outer face of the stacked disc and clean water flows through the stacked discs out of the filter
Disc elements provide in depth filtration to retain organic matter
Hydraulic pressure during the filtering process causes fastening of the disc and allows for efficient filtering
Closing of the tightening nut without pressure leaves enough space between the disc to allow for a good cleaning when an automatic back flush is performed
Available with manual drain valve located at the bottom of the filter and with two pressure testing ports
Available with horizontal inlet and vertical outlet. 2" threaded, 3", 4" flange and horizontal inlet and outlet for the double
The filter can be cleaned manually or automatically
Low friction loss
Range of disc: 60 to 150 mesh
Discs have excellent resistance to most common chemicals
Color coded replacement discs
Suitable for all irrigation uses and industrial application
Large filtration area allows long intervals between cleanings
Easy maintenance: the disc can be extracted for easy cleaning
Non corrosive material
Inlet & Outlet Diameters
Filtration Surface Area
Max Recommended Flow Rates
Inch
SQ. Inch
GPM
2
249.5
110
3
249.5
220
4
325.5
350
3
325.5
220
The disk filter body has a 100-micron extra durable polyester coating applied electrostatic and oven-cured on a zinc phosphate layer for maximum anti-corrosion.
Flow (GPM) Versus Head Loss in PSI
Size
50
75
100
150
175
200
225
250
275
300
325
350
400
2"
0.15
0.35
0.6
1.3
2.0
2.4
3.3
3.7
4.9
5.3
6.5
7.2
9.4
3"
0.07
0.15
0.3
0.6
0.9
1.1
1.5
1.7
2.2
2.5
3.0
3.4
4.4
4"
-
0.7
0.1
0.3
0.4
0.5
0.3
0.6
0.9
1.1
1.3
1.5
2.0
3" double
0.1
0.3
0.5
1.2
1.6
2.1
2.6
3.2
3.9
4.6
5.5
6.0
8.0
Performance and technical data:
Filter cover: glass fiber reinforced plastic
Operating pressure: up to 150 PSI
Maximum recommended working pressure: 120 PSI
Available: 2" horizontal inlet and vertical outlet threaded
Available: 3" and 4" horizontal inlet and vertical outlet flange
Available: 3" double horizontal inlet and horizontal outlet flange or victaulic
Maximum working temperature: 140 degree F
Available with a manual drain valve located at the side of the filter and with pressure testing ports
2630 Performance and technical data:
Filter body and cover: glass fiber reinforced plastic
Operating pressure: up to 120 PSI
Option for manual drain valve located at the bottom of the filter and with pressure testing ports
Dimensions:
Filter dimensions for 11/2": 9.4" H x 10.1" W
Materials:
Filter body: corrosion resistant pre-treated zinc phosphate with electrostatic polyester sprayed on carbon steel
Cover: glass fiber reinforced polyamide
Seal: natural rubber BR
Grooved disc: polypropylene
Disc cylinder assembly: polyacetal
Tightening bracket: stainless steel 304
Drain valve: brass
Pressure testing ports seals: natural rubber BR
