Free shipping on orders $149 $99 & up. exclusions apply

360- Degree Adjustable Mini Bubbler Pattern on Barb


360- Degree Adjustable Mini Bubbler Pattern on Barb
In Stock

For use near groups of plants or under a large plant, the adjustable mini bubbler on barb model MS050 has a gentle stream 360-degree umbrella pattern that can be adjusted from small to large diameter by rotating the cap. Twisting the cap on the top of the bubbler will increase or decrease the flow.

Part #: MS050
$0.30 - $0.34 ea.
+ 1$0.34 ea.
+ 101$0.32 ea.
+ 501$0.30 ea.
  ( 2 ratings/reviews )

The umbrella mini bubbler is an adjustable high flow emission device available on a barb. The adjustable bubblers can be used with 1/4" micro tubing, inserted directly into the 1/2" drip tubing or connected to with a semi rigid poly riser to elevate the bubbler above ground, this part can be found under the drip accessories. The fingertip flow control can be adjusted from 0 to 35 GPH with a shut off option. The adjustable mini bubbler discharges the suggested flow at a pressure of 15, 20, 25 and 30 PSI, higher pressure will result in higher flow rates, while lower pressure will result in lower flow rates. Due to high flow discharges, the adjustable mini bubblers work well in small systems with short runs, and on flat terrain. We recommend installation of a 30-PSI pressure regulator on systems using the two models.

By: sales, 03/24/12

By: dva1946, 05/01/11

These guys are real winners, too. We use them in all garden / flower beds, and adjust individual heads to meet the specific location need.

We highly recommend these guys!!

Dave
Lakewood, CO

  • Bubbler pattern: 360° coverage
  • Diameter of Coverage: .7 to 1.9' full circle
  • Flow rates at preset pressure of: 15 PSI is 27 GPH, 20 PSI is 30 GPH, 25 PSI is 33 GPH, 30 PSI is 35 GPH
  • Materials: Polyethylene
  • Operating pressure: 15 to 30 PSI
  • Recommended filtration: 120 mesh
  • Recommended pressure: 25 PSI
  • 360-degree adjustable pattern
  • Can be taken apart for easy cleaning
  • Fingertip low control can be adjusted from 0 to 35 GPH with a shut off option
  • The barbed bubbler Install into a 1/4" micro tubing or on to a 1/2" drip tubing
  • The stake bubbler Install into a 1/4" micro tubing or only
  • UV protected; manufactured from superior durable plastics for long life against degradation