Free shipping on orders $149 $99 & up. exclusions apply

Solar powered Dual Station Drip Zone Assembly with Remote Handset


Solar powered Dual Station Drip Zone Assembly with Remote Handset
Discontinued

The Leit2 Kit 100 is The Drip Store's premium solar powered control station for drip systems. The kit (unassembled) arrives complete with 3/4" irrigation valves, 155 mesh filtration, and 25 psi pressure reducers. The LEIT-2 is a wireless, solar powered irrigation control system that combines remote control handset and an ambient (solar) powered controller capable of operating two irrigation valves. The LEIT RC2 remote control handset is an advanced wireless device that is used to communicate with the controller, at a distance of up to 300’ line of sight. The LEIT RC2 handset has a sophisticated and intuitive icon-based software used to review and program the LEIT-2 controllers. All controller functions are controlled and reviewed by the RC2 remote handset. After installation, no further visits to the controller are required.

Part #: LEIT2 KIT 100
Discontinued

See Added Parts to expand your system by purchasing additional pieces separately.

Features like no others and used for residential and commercial applications the LEIT-2 is an ambient (solar) powered, two-station wireless irrigation controller with rain sensor connection. The LEIT-2 system is comprised of the LEIT-2 controller,the LEIT RC2 remote control handset, DC valves and one mounting conflagration. The LEIT-2 can operate up to two valves and a rain sensor using a highly efficient photovoltaic module fueled by ambient light. After installation, no further visits to the controller are required under normal conditions. The controller is programmed using the LEIT RC-2 remote control handset from a distance of up to 300‘ line of sight.

· Exclusive photovoltaic module powers the LEIT-2 controller
· A sleek, full-featured handset can operates up to 99 controller
· Outstanding a round the clock features
· International appeal using multilingual software
· Distinguished menu base programming with user-friendly icons
· Operates up to 2 305DC-xxx valves
· Mounting configuration for any applications

Installing the LEIT-2 system required the following components:
Installed in any location with no AC power or battery needed
1. LEIT-2: 2 station ambient (solar) powered wireless controller with two yellow wires for rain sensor connection and four wires, with each two wires, red and white used for connection to each valve. Suggestion: We recommend that the user should reset the controller using the 2 yellow wires and a 9 volt battery before installation due to the fact that this type of controller has no backup batteries.
2. LEIT RC2: Remote control handset is used to communicate with up to 99 LEIT-2 controllers Suggestion: when connecting to the LEIT-2 controller for the first time and assigning a controller ID , assign any number from 2 to 99
3. Up to 2 DIG series ¾”, 305DC.075, 1” 305DC.100, 1-1/2” 305DC.150 and 2” 305DC.200 plastic in-line globe valves with latching solenoids are designed to operate with our LEIT-2 solar powered controller (see our valves section under DC valves). Suggestion: Connect the solenoids red and white wires to the controller station # red and white wires using water proof splice connectors
4. Mounting the LEIT-2 controller required one of the mounting configuration provided:
a. Valve box dome mounting model 30-830 allows mounting the LEIT-2 controller into any valve box. The mounting dome included a simple instruction of how to install it to the box
b. Valve clip mounting attachment with 4 screws model 30-831 allows to clip the controller and to mount it to one of the valve solenoid. This installation is suggested when the valves are above ground.

THE LEIT-2 POWERED BY PHOTOVOLTAIC MODULE
No more AC power needed or battery to replace, the photovoltaic module in the LEIT-2 harness light energy to generate electricity that is stored and used to power the controller day and night in any kind of weather. Light illumination is measured in terms of lux (lx) or foot-candles (fc). A lux is equal to the total intensity of light that falls on a 3.5 square feet (one square meter) surface that is one foot away from the point source of light. In normal day with direct sunlight an average of 100,000 lux can be measured. The exclusive LEIT-2 controller requires only an average of 3000 lux for normal operation

HOW MUCH LIGHT IS NEEDED?
The LEIT-2 controller are unique to all other water irrigation control systems because of their ability to harness ambient light to generate electricity. The electricity is stored in a long life non-battery based Super capacitors and used to power the controller. This feature allows the LEIT-2 system to operate day and night in any area, in any weather conditions, 7 days a week, and 24 hours a day.

THE LEIT-2 IS AN ENVIRONMENTALLY CONSCIOUS GREEN CONTROLLER
DIG Corporation designed a product with the environment in mind, a product that can use less energy and disposed of easily without adverse effects on the environment. The electronic assembly and components are certified lead free and the controller does not use a battery to store power, as a result, various toxic pollutions from leads are prevented. Above and beyond, the controller mounted directly or close to the valve saving or eliminating the needs for long copper wires. The controller also use technologies that utilizing ambient light as a source of energy to power the controller, providing a foreword-looking technological and a green controller

LEIT2 Kit 100 Instructions

LEIT2 KIT 100 -   Premium 25 PSI ¾” Valve Manifold Assembly Instructions                          

Parts list:                                                                                           

  1. LEIT-2 solar controller
  2. LEIT-RC2 wireless handset
  3. VA024 dual port manifold
  4. SWF006 end cap
  5. SWF013 1” x ¾” MPT adaptor (2)
  6. 305DC-075 inline valves (2)
  7. F303 “Y” filter 155 mesh (2)
  8. A044 pressure regulator (2)
  9. 30-831 clip mounting
  10. SC010 waterproof wire splice connector (4)

You will need:

  • Teflon plumbers tape (sold separately -- Drip Store model A042)

Instructions:

  1. Attach SWF013 – 1” x ¾” MPT adaptor for swivel manifold -- to ¾” inlet port of each of two (2) 305DC-075 valves.  The inlet port for these valves is the side opposite the electric solenoid. No Teflon tape is needed for swivel manifold connections using purple gaskets.
  2. Use two wraps of Teflon tape on both ¾” MPT sides of filter F303.  Determine filter flow direction by noting the arrow on the top body housing labeled “SCREEN.”  The arrow indicates the direction water should flow.
  3. Carefully thread filter inlet to outlet port of each valve.  The outlet port on these valves has a small circle labeled “¾ in. NPT” on the underside of the valve.
  4. To filter outlet (side with flow indicator arrow), carefully thread the female side of pressure regulator A044.
  5. Attach your complete valve, filter and regulator assembly to 1” swivel ports on manifold VA024.
  6. Attach end cap SWF006 to male end of the manifold.
  7. Your valve manifold assembly is now complete.  Remove packaging from controller and wireless handset.  Installation instructions and wiring diagrams for these items are included.  Follow these installation instructions for solar controller LEIT-2 two (2) station ambient light (solar) powered irrigation controllers.
Kit QtyPart #ImageDescription
1LEIT-2LEIT-2 : DIG ft. s Ambient light (solar) Powered, 2-Station Wireless Irrigation Controller , Model LEIT 2 Model LEIT 2DIG’s Ambient light (solar) Powered, 2-Station Wireless Irrigation Controller , Model LEIT 2
1LEIT-RC2LEIT-RC2 : DIG, LEIT Wireless Remote Control Handset use with the LEIT 2 System  , Model LEIT-RC2 Model LEIT-RC2DIG, LEIT Wireless Remote Control Handset use with the LEIT 2 System , Model LEIT-RC2
2305DC-075305DC-075 : 3/4”  9-VDC  Inline Valve with Flow Control 3/4” 9-VDC Inline Valve with Flow Control
130-83130-831 : Valve Clip Mounting Attachment with 4 Screws Valve Clip Mounting Attachment with 4 Screws
2A044A044 : 3/4 in.   FNPT Premium Pressure Regulator, 25 PSI 3/4" FNPT Premium Pressure Regulator, 25 PSI
2F303F303 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 155 mesh polyester,  green 155 mesh polyester,  green3/4" MNPT "Y" Screen Filter with Flush Cap, 155 mesh polyester, green
4SC010SC010 : Waterproof Splice Connectors Waterproof Splice Connectors
1SWF006SWF006 : End Cap 1” FPT with O-ring End Cap 1” FPT with O-ring
2SWF013SWF013 : Nipple 3/4 in.  MPT x 1” MPT Nipple 3/4" MPT x 1” MPT
1VA024VA024 : Swivel Manifold with 2 Swivel outlets 1” FPT with O-ring x MPT Swivel Manifold with 2 Swivel outlets 1” FPT with O-ring x MPT
KIT LEIT2 KIT 100 contains a total of 17 pcs. for $409.89
ImageDescriptionPart #PriceQty.
LEIT-2 : DIG ft. s Ambient light (solar) Powered, 2-Station Wireless Irrigation Controller , Model LEIT 2, Model LEIT 2 Model LEIT 2DIG’s Ambient light (solar) Powered, 2-Station Wireless Irrigation Controller , Model LEIT 2, Model LEIT 2LEIT-2Discontinued
LEIT-RC2 : DIG, LEIT Wireless Remote Control Handset use with the LEIT 2 System  , Model LEIT-RC2, Model LEIT-RC2 Model LEIT-RC2DIG, LEIT Wireless Remote Control Handset use with the LEIT 2 System , Model LEIT-RC2, Model LEIT-RC2LEIT-RC2Discontinued
305DC-075 : 3/4”  9-VDC  Inline Valve with Flow Control 3/4” 9-VDC Inline Valve with Flow Control305DC-075$41.32 ea.
30-831 : Valve Clip Mounting Attachment with 4 Screws Valve Clip Mounting Attachment with 4 Screws30-831$6.90 ea.
A044 : 3/4 in.   FNPT Premium Pressure Regulator, 25 PSI 3/4" FNPT Premium Pressure Regulator, 25 PSIA044$6.65 ea.
F303 : 3/4 in.  MNPT  in. Y in.  Screen Filter with Flush Cap, 155 mesh polyester,  green, 155 mesh polyester,  green 155 mesh polyester,  green3/4" MNPT "Y" Screen Filter with Flush Cap, 155 mesh polyester, green, 155 mesh polyester, greenF303$8.90 ea.
SC010 : Waterproof Splice Connectors Waterproof Splice ConnectorsSC010$0.65 ea.
SWF006 : End Cap 1” FPT with O-ring End Cap 1” FPT with O-ringSWF006$0.75 ea.
SWF013 : Nipple 3/4 in.  MPT x 1” MPT Nipple 3/4" MPT x 1” MPTSWF013$0.99 ea.
VA024 : Swivel Manifold with 2 Swivel outlets 1” FPT with O-ring x MPT Swivel Manifold with 2 Swivel outlets 1” FPT with O-ring x MPTVA024$6.76 ea.