Free shipping on orders $149 & up. exclusions apply

Professional Gun Punch with Tubing Cutter


Professional Gun Punch with Tubing Cutter
In Stock

The professional gun punch with 1/2" blank tubing and 1/2" drip line cutter is a heavy duty tool with a number of features helpful in the installation of a drip irrigation system. This handy punch can do it all. The main feature of the professional gun punch with tubing cutter is that it quickly and easily punches precise uniform holes in any size of drip irrigation tubing for insertion of drip emitters, micro sprinklers and 1/4" barb fittings. By lifting the white cover a cutter can be used with a simple pull of the lever to cut 1/4" micro tubing to 1/2" drip tubing by rotating the drip tubing as you cutting it. It can be used to insert 1/4" and 1/2" barbed connectors into the drip tubing more easily with a convenient connector gripper. Constructed of UV-resistant, high impact plastic.

Part #: A146
$22.01 ea.
  ( 6 ratings/reviews )

The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut the drip tubing or to insert connectors into the drip or micro tubing.

By: celticclay, 10/03/09

Whoops... I was referring to the Miracle Punch, not this fancy one.

By: celticclay, 10/03/09

I've been using my punch for 11 years. To the previous reviewer, it makes holes in the poly tubing so you can stick in barbed connectors. The goof plugs will bail you out if you make a mistake. Just pay attention to which side you're making holes on so your drip tape goes the direction you want. I couldn't be without it. Hope you get yours working for you.

By: rkoch, 05/15/08

I`m sorry I bought this. A lot of money for something that comes with no instructions and I cant figure anything out about how to use it or what it does. I`ve emailed the drip store for instructions but so far,nothing.

By: Tony Tucker, 07/15/06

No instructions. Very difficult to figure out how to use. Cuts good, but not real friendly for making holes in the tubing for barb installs. Not worth the money.

By: ron kolarovic, 06/15/06

Tube cutter works great. The hole punch works but you have to do the work by pushing and twisting which is not easy. No instructions. I also bought the miracle punch - use that for the holes and this thing for cutting tubes and pushing on barrbs.

By: Greg Devlin, 07/27/05

The Pro punch and tubing cutter does not come with a set of instructions. The 4 pictures which are intended to detail its uses do not cover all the parts on the cutter. The cutter is not nearly as effecient in cutting tubing as the basic cutting tools. The only real advantage I can see is the ability to easily install plugs.

  • Used to punch holes into the drip tubing or to cut the drip or micro tubing
  • UV resistant, high impact plastic