Free shipping on orders $149 & up. exclusions apply

Heavy Duty Ball Valve, 3/4" FNT x MNT


Heavy Duty Ball Valve,  3/4 in.  FNT x  MNT  3/4 in.  FNT x  MNT
Discontinued

3/4" FPT x MPT plastic ball valve is used for on/off control by turning the lever 80 degrees. Complete with rubber hose washer to use as a filter flush valve or as a shut-off valve for downstream or upstream

Part #: A160
Discontinued
  ( 1 rating/review )

This 3/4" FPT x MPT ball valve with pipe threads is used for on/off control of individual drip lines, garden hoses, as a shut-off valve for downstream or upstream repairs, in place of a filter flush cap or to control other irrigation connections.

By: CunkyC, 08/09/12

These are BSPT (British Standard Pipe Thread) not NPT as advertised. 3/4" BSPT is clearly moulded on the side of the valve. Which leads me to believe that it was most likely imported from China or Japan. Clearly the description needs to be updated to reflect the actual thread standard.

Also not a full port valve, not that it matters to me but it may to you.

The Drip Store ~ response by: Cameron, 08/14/12

We thank this customer for bringing this part correction to our attention. The A160 should, in fact, be a national pipe thread. Our stock was mixed with some BSP items, and consequently this customer will have to be sent the correct ball valve.

  • Barbed inlet and outlet : 3/4" FNPT inlet and 3/4" MNPT outlet threads
  • Operating pressure: up to 60 PSI
  • Temperature range: Up to 130°F
  • Constructed of black polypropylene for corrosion resistant operation
  • High flow with low pressure loss
  • Inlet and outlet with Buna-N O-rings ensures watertight seals
  • Large handle for easy manual control
  • Rapid 1/4" turn on and off for tight, no drip, shut off
  • Smooth opening and closing eliminates pressure loss