The 3/4" – 2” plastic inline globe valves with 24-VAC solenoid models C022 – C025 (DIG series 33-xxx) operate with any 24 VAC irrigation controller. Made of reinforced nylon and non-corrosive material, the valves are designed for reliability in a variety of demanding applications. Features include flow control handles for flow adjustment and manual shutoff, manual levers for opening the valve without external bleed, and smooth valve opening and closing.

• Body Styles: globe valve
• Coil resistance @: 68° F 37.5 ohms
• Holding current: 0.14 Amp @ 50 Hz
• Inlet and outlet :
• Inrush current: 0.29 Amp @ 50Hz
• Operating pressure: 10 to 150 PSI
• Power consumption : 1.7/2.2 watts @ 50Hz
• Solenoid: 24 VAC 50/60 Hz (cycles per second), Heavy duty construction, Low sensitivity to dirt and voltage fluctuations, Replaceable plunger tip, Silicone O-ring
• Temperature range: Up to 170 F (76.7 C)
• Valve flow rate: 1": .2 to 35 GPM

• Constructed of glass reinforced nylon with a stainless steel spring; non-corrosive materials
• Easy in-line maintenance
• Electric or manual operation
• Flow control handle for water flow adjustment and manual shutoff
• High flow with low pressure loss
• High performance solenoid with low electrical power consumption
• Manual internal bleed override for opening and closing the valve without external water spill
• Normally closed
• Rugged, with reinforced and supported self-cleaning diaphragm that provides reliable operation even with dirty water
• Smooth valve opening and closing prevents pressure surge hazards