The C033 (DIG 710P series) propagation and Irrigation, single station battery operated controller from DIG includes a 1” high flow, in line globe valve and a rain sensor connection. The advance, 2-wire battery operated controller has a smaller size profile and is operated by one 9-volt battery. Used for propagation and irrigation in greenhouse, nurseries and area where a large number of watering starts time through the day are needed. Used for drip irrigation, propagation or pulse irrigation in commercial or agricultural applications and as a cost-effective repair for existing irrigation systems, this line of heavy duty controllers features a large LCD display with four buttons to program and complete water proofing capability for use inside a valve box or above.

Watering schedules can be set according to four different programs.

1.Standard watering cycle: Seven day calendar with four start times per day
2.Cyclical watering cycle: From every day up to once every 30 days
3.Repeat watering cycle: From 1 hour to 23 hours
4.Repeat watering cycle in one minute intervals with window to start at am or pm, and window to close at am or pm

Other programming features include AM/PM clock, four start times per day, watering duration from one second to eleven hours and 59 minutes in one-second increments, 7 day programming schedule or cyclical from every 1 minute to 45 minutes, 1 hour to 23 hours and 1 to 30 days with rain delay of up to 30 days. The controllers use one nine-volt alkaline battery that can last up to one year depending on the program used. All valves are made of durable reinforced nylon with stainless steel spring and have flow control with manual on/off.

• Available: 3/4" and 1", 1-1/2" and 2" NPT female inlet and outlet
• Body Styles: globe valve or angle valve
• Dimensions: Controller with valve, 3/4" and 1”: 8" W x 7.5 L x 3 7/8" H
• Flow rate: 1": .2 to 35 GPM
• Materials: Controller: Body - ABS, Inner parts - Acetal , Diaphragm: nylon fabric reinforced polyisoprene (NR) , Solenoid inner metal parts: stainless steel , Valve body and cover: glass reinforced nylon , Valve: Metal parts and screws: stainless steel 303
• Power draw: .2 amp per cycle
• Power source: 9 Volt DC (one 9-volt alkaline battery not included)
• Solenoid: Adaptor thread 3/4"-20 thread UNES-2A , Dry latching
• Temperature range: 38 to 130 F

• Automatic, semi-automatic and manual operation
• Available with 3/4", 1" in-line valve
• Battery life up to two years
• Color coded three wire connector with 3/4" -20 threaded solenoid
• Constructed of durable, high impact plastic and stainless steel
• Digital display blinking indicates low battery
• Easy to read AM/PM clock
• Four button keypad with an integrated liquid crystal display (LCD)
• Frequency choices of minutes, hours and days
• High flow with low pressure loss
• Internal manual bleed
• Irrigation suspension override (rain mode)
• Irrigation watering duration from one minute to twelve hours in one minute increments
• Manual flow control
• Manual irrigation cycle via the controller or the valve
• Non corrosive materials
• Normally closed
• One piece diaphragm with reinforced plastic housing for reliable, leak free valve closing
• Powered by 1, 9-volt alkaline battery featuring low power consumption
• Program stored up to 20 seconds during battery change
• Propagation watering durations from 1 second up to 11 hours and 59 minutes in 1 second increments
• Rain delay up to 30 days
• Three year manufacturer’s warranty
• Tough, glass-filled nylon body and cover for long life
• Up to four start times per day
• Water budget up to 95% in 5% increments
• Watering windows can be programmed to last from 1 minute to 24 hours
• With rain sensor connection
• Withstands harsh climatic conditions, completely waterproof