Figure “8” Hose End for 1/2” Drip Tubing
In Stock
The figure ”8” hose ends are basic, common accessories used in the layout and installation of a micro irrigation system. The figure ”8” hose end is a simple part used to close the end of the drip tubing.
(
9 ratings/reviews )
- Part family: Figure “8” Hose Ends
- Included with kits: KIT EF55AS, KIT G77AS, KIT GE200, KIT GE200PLUS, KIT K001, KIT K002, KIT K003, KIT K004, KIT K006, KIT K007, KIT K008, KIT K009, KIT K013, KIT K014, KIT K015, KIT K016, KIT K017, KIT K018, KIT K020, KIT K021, KIT K022, KIT K025, KIT K026, KIT K027, KIT K029, KIT K031, KIT K100, KIT ML50, KIT R750
The figure "8" hose end for 1/2” drip tubing is used in the installation of a drip irrigation system using 1/2" drip tubing or drip line. The figure “8” hose end offers a quick and easy way to securely close off the end of the 1/2" poly drip line after the drip tubing has been flushed.
By: Messoid, 08/22/12
Cheap solution to caping the ends of your lines off. Not the best looking solution, but fool proof and effective.
By: rharris1951, 06/16/11
By: dva1946, 05/01/11
These are great. Very inexpensive, and easy to use. We also use end caps, but probably should just use these guys.
By: Aquia33, 09/12/06
Great hose end. I use it for those low er lying areas that need draining in the winter, just slip up the "8", drain, and slip back in place. No fuss.
By: Roger Daisley, 06/06/06
Quick and easy ... works as stated. An inexpensive way to terminate a line. Recommended.
- The figure“8” hose end is available in three sizes, 1/2", 3/4" and 1”
- Used to close holes in the micro tubing and drip tubing or to close the end of the drip tubing
- UV resistant, high impact plastic
Installation for Hose Ends
Using figure “8” hose end: Insert the end of the drip tubing into one side of the figure "8" hose end. To close the end of the drip tubing or drip line, bend the drip tubing and insert the drip tubing end into the other side of the figure "8" for a hose end configuration. Bottom of Form
·
.
