Free shipping on orders $149 up. exclusions apply

1/2" Barbed Ball Valves

1/2 in.  Barbed Ball Valves
In Stock

The ½” barbed ball valve is used as on/off valve for a drip tubing or drip line lateral. The ball valve can be used with individual ½” drip tubing with .700 OD and 17 mm drip line with a .670 OD.

Part #: A007
$1.91 ea.
  ( 7 ratings/reviews )

Choose the correct model ball valve to match the diameter of the drip line, drip tubing, or poly tubing you need to shut off – 1/4", 1/2", 16mm, 17mm, or 3/4” x 17mm - for downstream or upstream repair of an individual line or lateral.

By: donnacrews, 06/15/14

these work great; they dont pop off should the pressure be too high. I love them.

By: ldstrange, 04/22/13

Work as problems.

By: Messoid, 08/22/12

Great little valves. Operate smoothly and are a great deal.

By: James Franks, 05/29/12

Please exchange the 5, 1/2" barbed valves-Part #A007 placed earlier today with 3, 1/2" barbed valves--Part #A117. A mistake was made in ordering the correct size. Please call me at 225-317-1320 if needed.


Order #18353
Cust. #71594

By: Terry Melinder, 05/03/12

Good positive valve, easy to turn.

By: anoldgeezer56, 04/05/12

I use these to control a water feature with multiple outlets. First rate. This is my 2nd order. 3 1/2 days from order to mailbox. Excellent service

By: dpurdy, 01/27/12

No problem with these valves at all. They allowed me to isolate multiple lines and enable me to deliver the correct amount of water and nutrients to each row of crops. Well made and durable.

  • Barbed inlet and outlet :
  • Operating pressure: up to 60 PSI
  • Recommended pressure: 10 to 30 PSI
  • Temperature range: Up to 120 F
  • Constructed of polypropylene and other non-corrosive materials
  • High flow with low pressure loss
  • Low-torque handle
  • Smooth opening and closing eliminates pressure loss
  • Used with two "O" rings for watertight seals