The micro sprinkler can be used for uniform watering in an inverted position for germination, seedling, and cutting in greenhouses, hothouses and nurseries. The micro-sprinkler can be connected upside down directly into the main lateral with the assembly that includes, anti-leak device model, G102 or G103 and micro tubing with weight model, G115 to G117 or with 1/2" female thread base, model G110. Available with flow rates of 42 GPH with black nozzle.

• Flow rate @ 30 PSI:
• Mounting: stabilizer weight, anti-leak device, 12" or 24" and 36 " micro tube and barb
• Nominal Flow: 30 PSI
• Operating pressure: 25 to 30 PSI
• Operating Pressure in Overlapping Irrigation: 35 PSI
• Pattern: 360°
• Recommended filtration: 120 mesh
• Recommended layout : 2' to 6' above the bench
• Recommended micro-sprinkler spacing: 12' to 18' apart
• Recommended spacing between micro sprinklers laterals: 12' to18' apart
• Trajectory Angle: Approximately 1°
• Wetting diameter : up to 25' mounting 6' above the ground

• Built in secondary filter
• Color coded nozzles for flow rate identification
• Excellent performance with uniform water distribution
• Frame construction without a bridge provides a complete 360 degree circle
• Made of durable materials ensuring resistance to most chemicals and fertilizers for long-lived trouble free operation
• Modular design allows for a wide range of interchangeable components
• Prevent damage to sensitive plants caused by the dripping at the end of irrigation cycle
• Strong propulsion of the spinner provides uniform water distribution
• Suitable for inverted position with recommended spacing 12 to 18' apart