Free shipping on orders $149 & up. exclusions apply

1 GPH, Inverted Four-Way Low Flow Fogger Assembly with Anti Leak Device, 12” Micro Tubing, Weight and Barb


1 GPH, Inverted Four-Way Low Flow Fogger Assembly with Anti Leak Device, 12” Micro Tubing, Weight and Barb
In Stock

Used for cooling and humidifying in an inverted position, the 1 GPH per outlet four-way fogger assembly from DIG Corporation includes two 1-GPH foggers, anti-leak device, weight, 12” micro tubing and barb. Used for greenhouse applications and operating in an inverted position, the two-way foggers provide maximum performance using micro-sized droplets under normal operating pressure. The anti-leak device prevents dripping at the end of the cycle, keeping the lateral lines under pressure, saving water and fertilizer that would otherwise be wasted as water drains the line.

Part #: GD410-12
$4.68 ea.

Using low flow foggers is an extremely efficient method of controlling greenhouse conditions, such as to increase humidity or cooling. The very small droplet foggers are perfect for creating the ideal micro-climate conditions inside the greenhouse. Most fogging systems require high pressures, often up to 1,000 PSI, and are very expansive to install. The foggers we provide are affordable and designed to function at operating pressures of 50 to 70 PSI. Our foggers use 200 mesh filter and will suffer less wear and tear at the lower PSI requirements, will have fewer nozzles to replace and will last longer. To prevent wetting, use the fogger in a short cycle and avoid fogging against a roof or other structure to prevent dripping. The foggers can significantly reduce the temperature inside greenhouse and can maintain ideal temperature and humidity level.

  • Available with two flow rates from DIG Corp: Anti-leak closing pressure: 10 to 12 PSI, Anti-leak penning pressure: 16-22 PSI, Blue nozzle: 1.8 GPH @ 50 PSI, Green nozzle: 1.5 GPH @ 50 PSI
  • Available with two flow rates from NaanDan Jain Irrigation: Anti-leak closing pressure: 10 PSI, Anti-leak penning pressure: 25 PSI, Black nozzle: 1 GPH @ 60 PSI, Orange nozzle: 3.6 GPH @ 60 PSI
  • Droplet Size: 40 to 100 microns depending on pressure
  • Mounting: stabilizer weight, anti-leak device, 12" or 24" micro tube and barb
  • Pattern: 360°
  • Recommended filtration: 200 mesh
  • Recommended fogger spacing : 3' to 4' apart
  • Recommended layout : 2' to 6' above the bench, 6' or higher (higher is better)
  • Recommended line spacing : 3' to 5' apart
  • Trajectory Angle: Approximately 30-35°
  • Can be used for overhead cooling and humidifying in a closed structure
  • Can be used on an anti leak device with one, two or four fogging head assemblies
  • Designed without a bridge to prevent dripping
  • Incorporates a vortex mechanism, breaking the water into micro-sized droplets
  • Interchangeable color coded nozzles
  • Manufactured from superior durable plastics for extended life, dependable operation and resistance to most chemicals and fertilizers
  • Prevent damage to sensitive plants caused by the dripping at the end of irrigation cycle

Installation for Inverted Foggers

Using low flow foggers is an extremely efficient method of controlling greenhouse conditions, such as to increase humidity or cooling. The very small droplet foggers are perfect for creating the ideal microclimate conditions inside the greenhouse. Most fogging systems require high pressures, often up to 1,000 PSI, and are very expansive to install. The foggers we provide are affordable and designed to function at operating pressures of 50 to 70 PSI. Our foggers use 200 mesh filter and will suffer less wear and tear at the lower PSI requirements, will have fewer nozzles to replace and will last longer. To prevent wetting, use the fogger in a short cycle and avoid fogging against a roof or other structure to prevent dripping. The foggers can significantly reduce the temperature inside greenhouse and can maintain ideal temperature and humidity level.