The GE200 Drip Irrigation and Micro-Sprayer Kit from DIG Corporation is one of The Drip Store's best selling kits. It contains a 3/4" back-flow device, a 25-PSI 3/4" preset pressure regulator, a 3/4" swivel adapter, 200’ of high quality 1/2" drip irrigation hose with 600” ID x .700” OD, 50’ of 1/4" micro tubing, 11 completely assembled micro sprayers with 360, 180 and 90 degree spray patterns, with 13” stakes and 24” of micro tubing, and 20 one GPH (gallon per hour) pressure-compensating drip emitters. In addition the kit includes a wide range of components to water a garden planted with roses, shrubs, ground cover, flowerbeds and trees up to 700 SF. The DIG Drip Irrigation and Micro-Sprayer Kit can accommodate expansion up to 1000 SF using additional drip hose, drip emitters and micro sprayers with flow rate of up to 220 GPH.

One of the most important features of a drip irrigation system is the creation of a totally new and more favorable root zone environment within the planting. Drip irrigation or micro sprinklers can sustain this environment by using low flow rates to maintain constant soil moisture levels. This encourages better growth and disease resistance by reducing plant stress.

The DIG model GE200 Drip Irrigation and Micro Sprayer Kit is a complete irrigation kit that has all the parts needed to install a drip irrigation and micro sprayer system from a hose faucet (spigot).

Note: The pressure regulator (included) is used to lower the incoming pressure to the suggested operating pressure of 25 PSI, which is within the range of recommended pressures for a drip irrigation system or micro-sprinkler system.

• Maximum incoming operating pressure: 100 PSI
• Operating pressure: 25 to 30 PSI

• Instruction for DIG Complete Micro Sprayers & Drip Emitters Kit Model: 1008.92 KB 01/28/11

• Winterizing Your Irrigation System

• Drip irrigation tubing head loss

• Maximum recommended drip tubing length (in feet) on flat terrain with PC dripper

  For K025