The drip tape x drip tubing adapter is used to connect the 5/8” drip tape into the .700 OD drip tubing. To use this drip tape connector, turn the sleeve counter-clockwise, insert and push the drip tape over the barb and secure by turning the outer sleeve clockwise to go over the drip tape. To connect the drip tubing into the compression fitting side, insert the .700 OD drip tubing into the compression side of the fitting, pushing and wiggling the tubing back and forth into the fitting. The 1/2" compression fitting side uses a simple wrist action and the drip tubing is "walked" into the fittings for a very tight fit, ensuring a quality watertight connection. No tools, glue or clamps are required.
The Drip Store’s drip tape fittings are available in many configurations to meet all types off applications in the layout and installation of drip tape.
The drip tape fittings use a sleeve assembly over a body with barb insert, allowing the user to install the many fittings that might be needed throughout the installation of the drip tape. The larger sleeve makes the drip tape fittings easier to install and tighten.
An advanced sealing interface with a long barb provides guides for the drip tape to slide over the barb for a secure seal. Our drip tape fittings are made of high impact UV resistant plastic and can last for many years.