Free shipping on orders $149 up. exclusions apply

1/2" (16mm) .520 to .540 ID Barbed Tee with 3/4" MNPT

1/2 in.  (16mm) .520 to .540 ID Barbed Tee with 3/4 in.  MNPT
In Stock

The 1/2" (16 mm) barb tee X 3/4" MPT is used for two-way layout connecting the drip lateral with .520 ID to .540 ID (16 mm) to a PVC pipe using a PVC tee with 3/4” FNPT. By using a double barb, the tubing is pushed over the barb for a very tight fit. Use for a layout of drip tubing or drip line.

Part #: LF320
$0.53 ea.

The Drip Store’s black color 1/2" (16 mm) barbed drip fittings are available in a variety of configurations for 1/2" drip line or drip tubing with .520 to .540 (16mm) ID, providing a low cost and simple method for drip line and drip tubing installation.

  • Color: Black
  • Materials: Barb: Acetal
  • Operating pressure: up to 30 PSI
  • Use with: 1/2" drip tubing or drip line with .520 ID to .540 ID
  • Fits all brands of 1/2" (16 mm) polyethylene tubing or drip line with .520 ID to .540 ID
  • Made with high impact UV resistant plastic
  • Secure and easy installation without glues or clamps

1/2" Barb Fitting suggested installation steps


The 1/2" (16mm) barb fittings are used in the installation of any brand name drip line or drip tubing. To connect the 1/2” (16 mm) drip tubing or drip line, use a hand pruner to cut the drip tubing or drip line, being careful to keep dirt from entering the drip tubing. Insert the barb side of the fitting into the end of the 1/2” drip tubing or drip line by forcing the drip tubing over the barb side.