Free shipping on orders $149 $99 & up. exclusions apply

DIG Corporation OCEAN BREEZE® Large Misting cooling Kit


DIG Corporation OCEAN BREEZE® Large Misting cooling Kit
In Stock
Cooling misitng kit

The OCEAN BREEZE® large misting kit from DIG Corporation is used for cooling the surrounding area around the pool and patio for up to 20 degree Contains 50’ of 3/8” beige poly pipe and can be expanded up to 250'.

Part #: MI050
$19.94 ea.

See Added Parts to expand your system by purchasing additional pieces separately.

The OCEAN BREEZE® MI050 (DIG # BC380) cooling kit from DIG Corporation contains 50’ of 3/8” beige poly pipe and 10 .8 GPH foggers. In addition, the kit includes a wide range of components needed to install a cooling system around the patio or pool area. This misting kit can accommodate expansion to a 400SF, using additional misting foggers and poly pipe. For the best cooling effect install the foggers heads every 3’ and 8-12’ above the ground.

Low-flow foggers are used for cooling of greenhouses, plants, animals and people. With a low flow rate of .8 GPH and with micro sized droplets the cooling and humidifying effect can be maximized with a drop of up to 20-degrees. The misting nozzle operating pressure ranges from 40 PSI to 80 PSI. Positioning the foggers 8' to 12' above the ground, with 3' to 4' spacing, will achieve a significant reduction of temperature - inside or outside a structure.

The OCEAN BREEZE® model MI050 Cooling system is a complete kit that has all the parts needed to install a cooling

  • Maximum incoming operating pressure: 100 PSI
  • Nominal Flow: 50 PSI
  • Operating pressure: 40 to 80 PSI
  • Total system flow rate: 8 GPH

Installation for MI050 & PB750

 

Starting the system from a faucet:

  1. Connect the 3/4" FHT swivel adapter (model MI024) to the faucet and to the swivel adapter compression side connect the poly pipe by wiggling and forcing the poly pipe in, then lay out around the patio or pool area.
  2. Use a 3/8” coupling (model MI020) to connect additional 3/8” poly tubing or for repair.
  3. Turn the water on and flush the line, and then close the end of the 3/8” poly tubing using end cap (model MI023).
  4. Raise the poly pipe and attaches it around the patio frame using the 3/8” C" Clamp (model MI025-05).
  5. Use the punch (model A019) to punch hole in the 3/8” poly pipe every 3-4’ at 120- degree and insert the fogger (model MI001) into the poly pipe.

See installation instructions inside the kit box for details.

Best cooling method:By turning the water on when the temperature is very hot and dry the Ocean Breeze Evaporative Cooling system can dramatically reduce the air temperature and at the same time increase the moisture content in the surrounding air. The hotter and drier the air, the more noticeable the cooling effect. For best results add a battery operated controller.

 

Kit QtyPart #ImageDescription
1A019A019 : Palm Hole Punch Palm Hole Punch
10MI001MI001 : .8 GPH (Violet) Fogger with 1/4” Barb .8 GPH (Violet) Fogger with 1/4” Barb
1MI005MI005 : 3/8 in.  Beige Poly Misting Line, 50 ft.   3/8" Beige Poly Misting Line, 50’
1MI020MI020 : 3/8 in.  Coupler  3/8" Coupler
1MI023MI023 : 3/8 in.  End Cap  3/8" End Cap
1MI024MI024 : 3/4 in.  FHT Swivel Adapter with Washer 3/4" FHT Swivel Adapter with Washer
15MI025MI025 : C-Clamp for 3/8 in.  Misting Line C-Clamp for 3/8" Misting Line
KIT MI050 contains a total of 30 pcs. for $19.94
ImageDescriptionPart #PriceQty.
A019 : Palm Hole Punch Palm Hole PunchA019$1.74 ea.
MI001 : .8 GPH (Violet) Fogger with 1/4” Barb .8 GPH (Violet) Fogger with 1/4” BarbMI001$0.76 ea.
MI005 : 3/8 in.  Beige Poly Misting Line, 50 ft.   3/8" Beige Poly Misting Line, 50’ MI005$9.42 ea.
MI020 : 3/8 in.  Coupler  3/8" Coupler MI020$0.67 ea.
MI023 : 3/8 in.  End Cap  3/8" End Cap MI023$0.66 ea.
MI024 : 3/4 in.  FHT Swivel Adapter with Washer 3/4" FHT Swivel Adapter with WasherMI024$2.19 ea.
MI025 : C-Clamp for 3/8 in.  Misting Line C-Clamp for 3/8" Misting LineMI025$0.30 ea.