The 90-degree adjustable micro sprayer is available with 10/32 thread. The micro sprayer has a flow rate of 0-25 GPH @ 15 to 30 PSI with a spray pattern of up to 10’ radius. This series of adjustable sprayers has no moving parts and can be used in home gardens for ground cover, flowerbeds and trees.
The Drip Store has a wide range of adjustable micro sprayers and jets to meet all of today‘s requirements for micro irrigation needs. The no moving parts adjustable micro sprayers can be used for a wide range of applications and are available with 90°, 180° and 360° patterns for small to large diameter and for watering that requires small droplet size with low precipitation rates. When low volume overhead irrigation is desired for an area where drip emitters are not practical and micro sprinkler diameter and moving parts are not required nor preferred, the adjustable micro sprayers may be what are needed. Like micro sprinklers, micro sprayers and jets are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the adjustable sprayer from clogging. The main advantage of adjustable micro sprayers to some users could be the lack of moving parts and the feature of adjustable flow rates.
To install the micro sprayer use one of our poly riser assemblies available in our accessories section and install it a minimum of 4” above ground.
To install the micro sprayer, first select the flow rate if available. Then from the accessories section select the assembly to use. Our suggestion is to use a clip stake and micro tubing with barb. First insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.