Free shipping on orders $149 up. exclusions apply

180-Degree Vari-Jet Adjustable Micro Sprayer on 10/32 Thread

180-Degree Vari-Jet Adjustable Micro Sprayer on 10/32 Thread
In Stock

The 180-degree adjustable Vari-Jet micro sprayer is available with 10/32 thread. The micro sprayer has a flow rate of 0-31 GPH @ 10 to 30 PSI with a spray pattern of up to 10’ radius. This series of adjustable sprayers has no moving parts and can be used in home gardens for ground cover, flowerbeds and trees.

Part #: MS021
$0.71 ea.
  ( 1 rating/review )

The Drip Store has a wide range of adjustable micro sprayers and jets to meet all of today‘s requirements for micro irrigation needs. Built-in adjustable flow control to control the distance or radius can adjust the water flow from 0 to 31 GPH and the diameter up to 26'. The no moving parts adjustable micro sprayers can be used for a wide range of applications and are available with 90°, 180° and 360° patterns for small to large diameter and watering that requires small droplet size with low precipitation rates. When low volume overhead irrigation is desired for an area where drip emitters are not practical and micro sprinkler diameters and moving parts are not required nor preferred, the adjustable micro sprayer may be what is needed. Like micro sprinklers, micro sprayers and jets are available in a wide variety of styles, flow rates, diameters, and configurations. Like micro sprinklers, they operate at low pressure and require a filter to protect the small orifice of the adjustable sprayer from clogging. The main advantage of adjustable micro sprayers to some users could be the lack of moving parts and the feature of adjustable flow rates.

By: prajendran, 04/20/12

Consistently, these are my 'go-to' sprayers. The 90 deg. ones are fine for small corners. The 360 deg. ones deliver circular patterns that don't cover as well and so there are usually gaps between circles. The 180 deg. sprayers are perfect. If you line them along the edging, facing the bed, you can really control how and where you water and still keep your pathways dry. The picture is a 360 deg. The 180 deg. doesn't have the fine holes that clog easily - just a slit and a deflector.

  • Assembly : 10/32 thread
  • Droplet Size: Large
  • Flow rate: 0 to 31 GPH @ 10 to 30 PSI with coverage of 0 to 26' diameter.
  • Pattern: 360°, 180° and 90°
  • Recommended filtration: 120 mesh
  • Recommended pressure: 10 to 30 PSI
  • Trajectory Angle: Approximately 40°
  • Available on 10/32 thread and completely assembled on 13" spike with 24” (.160 ID x .270 OD) micro tubing and 1/4" barb
  • Can be attached into the end of 1/4" micro tubing or into the 1/2" drip tubing.
  • Can be replaced with one of three available sprayers
  • Constructed of UV-resistant durable plastic materials, ensuring resistance to most chemicals and fertilizers used in landscape applications
  • Trouble free operation with no moving parts

Installation for Adjustable Micro Sprayer


To install the micro sprayer use one of our poly riser assemblies available in our accessories section and install it a minimum of 4” above ground.

To install the micro sprayer, first select the flow rate if available. Then from the accessories section select the assembly to use. Our suggestion is to use a clip stake and micro tubing with barb. First insert the spike into the ground about 2-4”, then punch a hole into the side of the drip tubing using a punch, and then insert the barb on the micro tubing into the drip tubing.