Free shipping on orders $149 $99 & up. exclusions apply

Adjustable Mister with 10/32 Thread, Pack of 5


Adjustable Mister with 10/32 Thread, Pack of 5
In Stock

The 360-degree, 0-8 GPH @ 25 PSI adjustable mister with 10/32 thread or the fully assembled adjustable mister with wired micro tubing and 1/4" barb from Orbit can cover a small area of up to 2’ in diameter when used with 1/4" micro tubing and mounted above the plant canopy. This mister has no moving parts and is used for fine misting of tropical plants, hanging plants, and may also be used for humidity control. For best results attach the threaded mister into 1/4" micro tubing and mount it in inverted position. The adjustable mister has a flow control knob that is used to adjust the flow from 0 flow to 8 GPH or as needed.

Part #: MS030
$3.87 ea.
  ( 1 rating/review )

The Drip Store has a wide range of fine droplet misters that are used for watering small pots and baskets or for humidifying effects if needed. The no moving parts 360° pattern misters have a small wetting coverage diameter and are used for watering or humidifying when small droplet size with low precipitation rate is required. When low volume overhead irrigation is desired for an area where drip emitters are not practical and the micro sprinkler large diameters are not required, use the fine droplet foggers-misters to spray above tropical plants and flowers, inside or out.

By: to_rajivmehra, 10/01/09

I got mixed experiences about this item. It needs a lot of presure to generate the mist. When I used it at a hieght of around 5 ft it worked as advertised....making a lot of mist.
But when I used it at two hanging baskets which are hung at a height of around 10' and I fed this mister using around 15' of 1/4 tubing.....it would not mist satisfactorily. It generated a wide stream instead. I guess the pressure up there is not enough.

Another problem was that due to the screw type connection the misters will sometimes pop off the end of the 1/4 tube. I had to push the tube all the way in...so that it was touching the valve. After that it is better.

  • Diameter of Coverage: 360 degrees, up to 2' in inverted position
  • Droplet Size: Very fine
  • Flow rate: 0 to 8 GPH
  • Inlet and outlet : Inlet size: 10/32 thread or assembly with micro tubing and barb
  • Recommended filtration: 150 mesh
  • Recommended pressure: 25 to 30 PSI
  • Spray trajectory: 30 to 40 degrees
  • Can be attached into the end of 1/4" micro tubing
  • Constructed of UV-resistant durable plastic materials, ensuring resistance to most chemicals and fertilizers used in landscape applications
  • Fine mist with small droplets starting at low pressure of 25 PSI
  • Model MS034 is a complete assembly with wired micro tubing and barb