The interchangeable 2 mm heat-treated steel pin is used as a replacement tip for the professional gun punch. Suggested uses: Use the 2 mm pin with the Spot Spitter system by punching a hole into the side of the drip tubing using the 2 mm pin, and then insert the micro tubing into the drip tubing. No barb connector or other parts are needed
The punches and cutters offered by The Drip Store are accessories used in installation of a micro irrigation system. They are used to punch holes, to cut or to insert connectors into the drip or micro tubing. The Drip Store’s range of punch and cutter accessories includes:
Basic palm punches: Very inexpensive and used only for punching holes into drip tubing.
Professional Gun Punch: Used for punching a large number of holes into drip tubing, using a durable heavy-duty heat-treated pin.
Professional Gun Punch with Tubing Cutter: Used for punching a large number of holes into the drip tubing, using a durable, heavy-duty heat-treated pin and includes a cutter to cut the drip tubing.
Cutters: Used for cutting the drip tubing.