Polyethylene drip irrigation tubing is used as the main lateral in the design and installation of drip irrigation or low volume irrigation systems on a wide range of applications, including commercial, agriculture and residential. The 1" polyethylene drip tubing, with 1.200 OD, from DIG Corporation is available in 250’ and 500’ coils.

This 1” drip irrigation tubing is made of Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin. The drip irrigation poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength. The Dow FINGERPRINT™ DFDA-7510 drip tubing from DIG includes an anti-oxidant to protect the end product from thermal degradation with 5% concentrated carbon black. The materials selected contain the Dow FINGERPRINT™ (trace element) that certifies the product and provides verification as to the identity of the drip tubing in the event of failure.

Note: Please be aware that shipping can be expensive on 500' and 1000’ coils of drip tubing due to their size and weight. Please review the shipping cost before checking out.

• Bending radius: 10"
• Color: Black
• Compatibility: Interchangable (can be used with) other manufacturer brands of the same .OD size tubing and fittings
• Materials: Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin
• Maximum flow rate: 13 - 14 GPM
• Operating pressure: up to 60 PSI
• Size: 1" 1.060 ID x 1.200 OD
• Use with: 1" fittings
• UV: 5% concentrated carbon black
• Warranty: Five year manufacturer’s limited warranty

• Available in 250' and 500' coils
• Contains the Dow FINGERPRINT™ (trace element) for identification in the event of failure
• The drip tubing exhibits outstanding environmental stress-cracking resistance and burst strength