This automated micro sprinkler irrigation kit with hose end battery operated timer, 15 micro sprinklers and other range of components capable of watering a garden planted up to 500 SF.
See Added Parts to expand your system by purchasing additional pieces separately.
The K022 Micro Sprayer kit is The Drip Store’s expanded, deluxe, custom designed kit that contains a hose end battery operated controller with LCD display, 200’ of high quality 1/2" drip hose with .600 ID x .700 OD and all the parts needed to complete a micro irrigation system. The watering components include 15 pre-assembled micro sprayers with 5 at 360-degree, 5 at 180-degree and 5 at 90-degree. In addition the micro sprayer irrigation kit includes a wide range of components used to install a micro sprayer irrigation system capable of watering a garden planted with roses, shrubs, ground cover, flowerbeds and trees up to 500 SF. The micro sprayer irrigation kit can accommodate expansion up to 1000 SF using additional drip hose, drip emitters and micro sprayers.
The model K022 Micro Sprayer Irrigation Kit is a complete kit that has all the parts needed to install a micro sprayer system from a hose faucet (spigot).
Suggestion in connecting the 1/2" compression drip fittings. To install the 1/2" compression fittings, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the line. Hold the compression fitting in one hand and the drip tubing in the other and force the drip tubing into the fitting by wiggling it from side to side. Make sure that the drip tubing is pushed into the compression fitting for about 1/2 to 5/8 of an inch for a very tight fit. No glue or clamps are required.
This micro sprayer irrigation kit has all the parts needed to start the system connecting to a faucet. The Drip Store also includes instructions on how to start the system from a PVC pipe or a pipe thread.
Starting the system from a faucet:
Optional: Starting the system from a PVC pipe:
Steps to connect all others components:
Micro sprayers have small droplets and a low flow application rate. Micro sprayer irrigation can prevent plant stress by maintaining low water tension in the soil using a low flow application rate. Use the micro sprayers to water groundcover, flowerbeds, or areas where drippers are not practical, such hillsides, or when low volume, overhead irrigation is desired. Like the drippers, the micro sprayers operate at low pressure but have a larger range of flow rates and diameters.
Note:The pressure regulator (included) is used to lower the incoming pressure to the suggested operating pressure of 25 PSI, which is within the range of recommended pressures for a drip system or micro-sprinkler system.
How much time to water: Turn the water onfor 45 minutes to 1 hour every two days, depending on your location and the soil type. After a week or two check the soil and the health of the plants, and adjust the irrigation time as needed. If you have a controller and you need to add more time, adjust the time on the irrigation controller or program the controller with additional start-times.
|Kit Qty||Part #||Image||Description|
|6||A006||Figure “8” Hose End for 1/2” Drip Tubing|
|1||A010||3/4” MPT x 3/4” MHT Nipple|
|1||A013||3/4" FHT Basic Pressure Regulator, 25 PSI|
|1||A015||Backflow Preventer 3/4" FHT x 3/4" MHT|
|1||A019||Palm Hole Punch|
|1||C002||DIG Corporation Digital Battery operated timer, 3/4" FHT x MHT|
|1||F300||3/4" "Y" Style Filter with Hose Threads, 155 mesh, polyester screen, green|
|5||LF001||1/2" .700 OD Compression Coupling|
|5||LF005||1/2" .700 OD Compression Tee|
|5||LF007||1/2" .700 OD Compression Elbow|
|1||LF503||3/4” FHT x .700 O.D. Swivel Adapter with Washer|
|5||MSA001||360° Spray Jet on Stake Assembly|
|5||MSA002||180° Spray Jet on Stake Assembly|
|5||MSA003||90° Spray Jet on stake Assembly|
|30||S006||5” Hold Down Stake for 1/2” Drip Tubing|
|2||SF007||Goof Plugs, Strip of 10|
|1||T060||DIG Corporation Drip Tubing, 200’, 1/2" coil with .700 OD|
|KIT K022 contains a total of 76 pcs. for $108.32|