The 3/4” compression insert with .940 OD drip tubing is glued to a 3/4” slip PVC coupling or tee and used to connect a 3/4” PVC pipe with .940 OD drip tubing. Use any quality PVC for the 3/4” insert. The Drip Store’s 3/4” compression drip fittings with .940 OD (gray INSERT) from NDS are used in the installation of drip irrigation using .940 OD drip tubing.
The Drip Store’s 3/4" compression drip fittings with .940 OD (gray Insert) are used in the installation of drip irrigation using .940 OD drip tubing.
To connect the 3/4” drip tubing with .940 OD, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the drip tubing. Hold the fitting in one hand and the drip tubing in the other and force the tubing into the fitting while wiggling the drip tubing from side to side. "Walk" the drip tubing into the fitting until about 1/2” to 3/4" of the drip tubing is inside the fitting.