Designed for commercial, residential and agricultural use, the 3/4" through 2” (models C051 through C055) (DIG series R710.075 to R710.200) plastic in-line globe valves with 9-VDC solenoid are designed to operate with our one-station (model C040) and four-station (model C046) (DIG series 710 and 740) battery operated controllers and other battery operated controllers that use 9-VDC solenoids. The 9-VDC solenoid has two color-coded wires that are used to connect to the corresponding wires on the battery operated controller, using waterproof connectors. Made of reinforced nylon and non-corrosive materials, this series of DC valves is designed for reliability in a variety of demanding applications.
Rated operating pressure: 10-125 PSI
Recommended Operating Pressure: 10-80 PSI
Warning: Wrap all fittings with Teflon tape! Do not use pipe cement on valve as this will damage the valve and void the warranty!
1. Shut off main water supply.
2. Install a 1 in. ball or gate valve onto the PVC pipe
or to the valve manifold before installing the controller
(Figure 1a and 1b).
3. Turn water supply on to flush the line and then shut the
water off using the ball or gate valve.
4. Wrap the male threads of the PVC adapters with 4-6
layers of Teflon tape, then tighten into the valve
with a wrench.
5. Glue fittings to PVC main line and allow to dry.
6. Turn water supply on to pressurize the system.
The controller will open momentarily
and then will shut off.
7. The unit is now ready to