Manufacturer: | DIG |
---|---|
Manufacturer #: | 710-100 |
This product qualifies for Free Shipping With an order total of $125 or more.
(Excluding Tax & Shipping)
Details Here
The completely waterproof model C042 (DIG 710 series) single station battery operated controller with a 1 inch in-line valve offers an alternative solution for automation where power is not available in a wide range of irrigation applications. Used for drip irrigation or sprinkler systems in residential, commercial or agricultural applications and as a cost-effective repair for existing irrigation systems, this line of heavy duty controllers features a large LCD display with four buttons to program and complete water proofing capability for use inside a valve box or above. Programming features include AM/PM clock, four start times per day, watering duration from one minute to eleven hours and 59 minutes in one-minute increments, 7 day programming schedule or cyclical from 3 hours to 30 days, rain delay of up to 30 days, a rain sensor connection and more. The controller uses one nine-volt alkaline batteries that can last up to one year. All valves are made of durable reinforced nylon with stainless steel spring and have flow control with manual on/off.
• Powered by 9-volt alkaline batteries with a safe period of 30 seconds to replace without losing the program
• Watering flexibility with a selection of watering frequencies and four start times
• Four button keypad with an integrated liquid crystal display (LCD)
• Easy to read LCD display with AM/PM clock and icon-based intuitive programming for easy navigation
• Frequency choices of a 7 day weekly schedule or intervals of every 3 hours, 6 hours, 12 hours and every day to 30 days
• Programming time options in AM/PM or 24 hour
• Non-volatile memory retains program and controller integrity (excluding time)
• Manual irrigation cycle can be performed via the controller's manual program
• Normally closed
• Water budget with up to 95% in 5% increments
• Low battery indicator
• Semi-automatic, automatic, or manual operation
• Efficient heavy-duty in-line globe valve with high flow and low pressure loss
• Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water
• Internal bleed via the solenoid for system checkup and testing
• 7 -12 volt latching solenoid
• Wire ready for a rain sensor
• Completely waterproof (IP68) - can operate in harsh environments
• Battery life up to one year
• Three year warranty
SPECIFICATION | • Controller type: DC
• Valve type: inline globe • Valve size: 1 inch with NPT female thread inlet and outlet • Operating pressure: 10 to 150 PSI • Flow rate: .1 to 28 GPM • Temperature range: 38°F to +130°F • Power source: one 9-volt alkaline battery (not included) • DC solenoid: two-way magnetic latching, normally closed, 7-12 Volt • Solenoid thread: ¾ inch-20 male thread • Solenoid wire: 18 inch • Sensor connection: normally closed yellow wire • Valve bonnet solenoid thread: 3/4 inch-20 female thread • Materials: •• Controller plastic housing: high impact plastic •• Valve plastic housing: reinforce nylon •• Valve diaphragm: NBR •• Plunger & spacer: 430F stainless steel Programming options • Watering duration: from 1 minute up to 11 hours and 59 minutes set in one minute increments
• Watering frequency: weekly or cyclical schedule from one to thirty (1- 30) days • Up to four start times per day in weekly schedule and one time per day in cyclical schedule provides added flexibility for any type of watering application • Rain mode with on/off • Manual cycle via the program with automatic shutoff Flow rate versus pressure loss
|
---|