200' 1/2" Polyethylene Solid Drip Tubing with .700 OD

Is this item out of stock? Try our 250' roll of 1/2" poly tubing! It's the same product but 25% larger.

You can't build a sandwich without bread, and you can't build a drip system without the tubing. That's not just a turn of phrase, it's actually impossible! No matter what kind of drip system you want to build, you will need tubing to serve as the core of the system. This 1/2" poly tubing is ideal for use as the main distribution tubing for a system.

The 1/2" designation for this tubing may be misleading as the ID (inside diameter) is .600" and the OD (outside diameter) is .700". If you measure it it's closer to 3/4" size, but it is referred to as 1/2" in the industry.

• Maximum flow capacity for this tubing is 220 GPH
• Maximum total line length for this tubing is 400'
• For every 100 ft. of tubing you will lose 4.4 PSI
• You can place drippers directly into this tubing using a hole punch tool (A019 & A035 are standard)
• Any of our fittings designated as .700 OD will work with this tubing