500', 5/8" (15 mil) Drip Tape with Emitters Every 12 Inches
TDS Model #
T013
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | 27-002 |
THIS PRODUCT ALWAYS SHIPS FREE
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
- Recommended for first time users and growers, the lighter weight per coil, thin walled drip tape is ideal for irrigation of vegetable crops and flower production at a lower cost. Drip tape is a flat tape with drip emitters or outlets in a predetermined spacing. The drip tape expands when filled with water and disperses the water through the preset outlets. The drip tape is ideal for crops or sites where total saturation coverage is desired along the drip tape path.
- FEATURES
- A Cv value of +/- 2% allows for higher operating pressures with higher uniformity and reliability
- Lower operating pressure used with drip tape means reduced energy needs
- Resistant to chemicals and fertilizers commonly used in agriculture and landscapes
- Used for above or below ground installation
- Using drip tape below surface allows for field operations such as harvesting to continue during irrigation time because the areas between the rows remain dry, resulting in better weed control and lower production costs.
SPECIFICATION - Size: 5/8 inch (15 mil or 0.015 inch) with .634 ID x.664 OD
- Length: 500’
- Nominal flow rate: .40 GPH (gallons per hour per outlet)
- Spacing: 12 inch
- Operating pressure: 7 to 25 PSI
- Maximum operating pressure: 25 PSI
- Maximum flushing pressure: 35 PSI
- Color code: black
- Suggested minimum filtration: 150 mesh
- Suggested fittings: drip tape fittings
- Manufacturer ‘s warranty: one year limited warranty
- Material: UV protected polyethylene resin
Drip emitters flow rate and pressure
Nominal flow rateFlow at 8 PSI
Flow at 10 PSI
Drip emitter spacing
Flow per 100 feet at 8 PSI
Flow per 100 feet at 10 PSI
.40 GPH
.31 GPH
.35 GPH
8 inch
.77 GPM
.87 GPM
.40 GPH
.31 GPH
.35 GPH
12 inch
.51 GPM
.58 GPM
